Page 1
Frizz Control Straightener Model No: NSS236 / NSS236-C / NSS236AG INSTRUCTION BOOKLET HOUSEHOLD USE ONLY Please READ and RETAIN for future reference...
Page 2
PLEASE RETAIN FOR FUTURE REFERENCE Thank you for purchasing your Nicky Clarke Frizz Control Straightener. To get the best from your new straightener, take a few moments to read these instructions and keep them in a safe place for future reference.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts.
Page 4
• EU ONLY: If this appliance is used in a bathroom you MUST install a residual current device (RCD) with a rated operating current not exceeding 30mA in the electrical circuit supplying the bathroom. An electrician will advise you of this.* •...
Page 5
• This appliance is authorized for household/residential use only DO NOT operate this appliance for anything other than its intended use. • DO NOT allow to be used as a toy. Close attention is necessary when used by or near children. •...
Feature Diagram The illustrations in these instructions may differ slightly from the actual unit supplied. 1) Temperature indicator lights. 2) On/Temperature increase button 3) Off/Temperature decrease button 4) Swivel cord 5) Storage lock switch 6) Ionic tourmaline coated ceramic plates For Customer Services please call 0345 209 7461 Or visit us at www.nickyclarke.com...
Page 7
To open the straightener, twist the locking ring to the position. Tourmaline & Ionic Technology Your Nicky Clarke hair straightener uses tourmaline technology which helps make hair softer and easier to style. Tourmaline is a precious stone that has been finely crushed and added to the ceramic coating, promoting natural benefits for the hair.
Page 8
create electrostatic electricity (which causes frizz). The ionic feature may help to rejuvenate your hair leaving it soft and shiny. Using Your Straightener Please be aware that your straightener can become very HOT! Do not touch on the ceramic coated plates. 1) Ensure your hands are dry and your hair is completely dry and tangle free before using your straightener.
Page 9
6) Select the most suitable heat setting for your hair type using the temperature increase (+) and decrease (-) buttons. As with all products that reach salon high temperatures, do not use your straightener too frequently to avoid damaging your hair. 7) The LED will flash for the temperature you have selected while your straightener heats up.
Cleaning and Maintenance To ensure your straightener remains at its optimal performance, it will require regular cleaning and maintenance. 1) Switch the straightener off, unplug from the mains, allow to cool fully, and discharge any residual charge by pressing the On switch to the On position, before returning to Off.
Troubleshooting Your straightener will stop working if it has overheated. 1) Unplug the straightener. 2) Allow it to cool completely. 3) Clean the plates. 4) Plug your straightener in and use normally. In the unlikely event that your straightener continues to overheat, unplug it and contact customer services.
Page 12
Connecting to the Mains Supply This appliance has been designed for BS Plug outlets only. It can be used with a suitable adapter, but under no circumstances should the plug ever be removed and changed for a different type. Any action to physically change the plug outside of changing the fuse will void the warranty on this appliance.
Page 13
Guarantee PLEASE RETAIN YOUR RECEIPT AS PROOF OF PURCHASE At Nicky Clarke, we take all our customer feedback seriously. Contact our Customer Service Team, on 0345 209 7461 who will be more than happy to assist you. This product is guaranteed for 12 months from the date of the original purchase.
Need help?
Do you have a question about the NSS236 and is the answer not in the manual?
Questions and answers