Download Print this page

UNI MAX Manual

Tone alert and ring tone amplifier

Advertisement

Quick Links

T82ALERT02-R

Advertisement

loading

Summary of Contents for UNI MAX

  • Page 1 T82ALERT02-R...
  • Page 2 For best performance, please insert the alerting device as shown below. The position as picture 2- picture 8 are not suggested.
  • Page 4 Tone Alert and Ring Tone Amplifier Thank you for purchasing Unication’s product, UNI MAX. UNI MAX will always alert you that your pager has been paged. Its high volume audible alert will always catch your attention. We hope you enjoy using it.
  • Page 5 2. Operation with your Cell Phone: Your Uni Max is also designed to work with most of the popular models of cellular phones. Please turn the cell phone to any audible alert mode and then place into the Uni Max.
  • Page 6 AA alkaline batteries only. The Uni MAX will operate normally from the wall transformer, but if the main power is interrupted, the Uni MAX will automatically switch over to the rechargeable batteries.
  • Page 7 Step2: Then simply insert the pin connector from Battery Pack into the mating connector inside compartment cover. the battery compartment of the Uni MAX unit. Step2: Observing the correct polarities, insert the AA batteries into the Uni MAX battery compartment as shown below.
  • Page 8: Operation

    Tone Alert and Ring Tone Amplifier Operation 1. Alert Tone Selection 3. LED Indicator The LED indicator will help you to identify the status of Uni MAX. Action With wall transformer Meaning Green The main power status is normal. Orange Rechargeable batteries are low and charging.
  • Page 9 2. Volume Setting Press and turn the volume knob to set an appropriate alerting volume level. When an alert has been detected, the UniMax will begin the alerting cycle at a low volume and increase to your setting over the time period selected in the following step. 2.press &...
  • Page 10 4. Reminder Visual Alert The Reset Button will keep flashing after an after an alert until it is pressed. 5. Stopping the Alert The alert stops automatically when the selected alert time (1 or 3 minutes) has expired You may also press the reset button to stop the alert. (Ordering part #: T65AMP001 ) 6.