Sata Commands; Native Command Queuing (Ncq); References; Table 5-6: Supported S.m.a.r.t. Execute Off-Line Immediate Subcommands - Viking Technology VPFEM4128GSCBMTL Manual

Table 5-6: Supported S.M.A.R.T. EXECUTE OFF-LINE IMMEDIATE
Subcommands
Value
00h
01h
02h
04h
7Fh
81h
82h
84h

5.2 SATA Commands

The SATA 2.6 specification is a super set of the ATA/ATAPI-7 specification with
regard to supported commands. SSD's support the following features that are
unique to the SATA specification.

5.2.1 Native Command Queuing (NCQ)

SSD's support the Native Command Queuing (NCQ) command set, which
consists of
 READ FPDMA QUEUED
 WRITE FPDMA QUEUED
Note: With a maximum queue depth less than or equal to 32.

6 References

 Serial ATA Specification, Revision 3
 PCI Express M.2 Specification, Revision 1.0
Manual
PSFEM4xxxGSxxx
Revision G
www.vikingtechnology.com
Description
Execute S.M.A.R.T. off-line routine immediately in off-line mode
Execute S.M.A.R.T. Short self-test routine immediately in off-line mode
Execute S.M.A.R.T. Extended self-test routine immediately in off-line mode
Execute S.M.A.R.T. Selective self-test routine immediately in off-line mode
Abort off-line mode self-test routine
Execute S.M.A.R.T. Short self-test routine immediately in captive mode
Execute S.M.A.R.T. Extended self-test routine immediately in captive mode
Execute S.M.A.R.T. Selective self-test routine immediately in captive mode
9/20/2016
Viking Technology
Page 35 of 36