Maintenance - Aerus BEYOND SANCTUAIRY MINI EM Owner's Manual

3. Remove the protective film
from the Velcro mounts.
4. Position the Sanctuairy Mini
EM over the Mini Split indoor
intake.
5. Press down firmly to attach
to unit.
6. The power leads can be connected to the Mini Split HVAC power source typically
through the back of the indoor unit. Some models may be different.
7. Remove any cover to the power connection
points. Connect Black Lead to the S1 terminal.
Connect White Lead to the S2 terminal.
8. Replace any cover over the power connection
and dress wiring to prevent any possible
damage to the leads.
Once you have reconnected power to the Mini
Split HVAC system, the Sanctuairy Mini EM will
automatically work using the Mini Split HVAC
power source.

MAINTENANCE

The Sanctuairy Mini EM requires no maintenance beyond normal replacement of the ActivePure®
cell. Instructions for replacement of the ActivePure cell, as well as the ballast should it need to be
replaced, are provided herein. Please contact your local Aerus franchise for service.
Note: For optimal performance, we recommend the replacement of the ActivePure® cell every year,
even if the UV lamp appears to be operating normally.
4
WARNING
Before you begin installation, verify the Mini Split HVAC
-
system is turned off and disconnected from the power source. Failure to
disconnect the power may result in severe electrical shock.
S1 S2 S3