Installation - Atag One Zone Quick Start Manual

Installing ATAG One zone and activating the ATAG zone services is quick and easy:
it takes just 3 steps!
ATAG One zone

INSTALLATION

The term "Telediagnosis" (TD) means the Technical Assistance Centre service, which can pro-
vide remote support functions. The term "Telecontrol" (TC) means the end user service con-
trolling, monitoring and configuring the ATAG appliance with a smartphone app or web portal.
Search in Google for:
- Setting up an ATAG ONE Zone user account.
- How to connect an ATAG ONE Zone Controller (2019 onwards).
- Setting your heating with the ATAG ONE Zone controller.
4. ATAG One zone INSTALLATION
The device detects the room temperature, therefore several factors should be taken into ac-
count when choosing an installation site. Position the device far from heat sources (radiators,
sunlight, fireplaces, etc.) and from draughts, doorways and win-
dows which could affect the temperature readings. It should be
installed approximately 1.5 metres above the floor level.
WARNING!
Installation should be performed by a qualified technician.
Before making any connections, shut off electrical power to
the boiler with its external two-position switch.
- Secure the ATAG One zone base plate (A) to the wall and
connect the pair of wires to the terminal clamp to hook the
boiler up via the BUS.
- Fit the battery in its compartment (B).
- Reattach the ATAG One zone to its base plate (C) by pushing
it carefully downwards.
14 / EN
ACCOUNT
REGISTRATION
ON-LINE PRODUCT
REGISTRATION
A
B
C