9
R
EPLACING
This section describes how to:
Remove batteries
Install batteries
9.1
R
EMOVE
Make sure that all power is disconnected before any works starts.
If the cabinet is an EQ Zone 4 cabinet the EQ Zone 4 reinforcement in
front of the batteries has to be removed before the batteries can be
removed. Do as follows to remove the reinforcements:
1.
Figure 9
Doc. No:
D000100-INS-03, Rev D
B
ATTERIES
B
ATTERIES
Remove the cross braces as in Figure 9.
Remove Cross Braces
Page 24 of 36