Elk -PD9 Manual

Power Distribution Modules

ELK-PD9
ELK-PD9HC
These Power Distribution Modules conveniently
distribute a single A.C. or D.C. input into nine
individual outputs, for centrally powering Video
Cameras, PIRs, Photobeams, etc. Each output is
protected with an auto-resetting PTC to protect a
shorted output from disabling the other outputs. A
visual LED power indicator is provided for each
output along with a single Master Power On/Off
Switch. The modules accept a 6 to 30 Volt A.C. or
D.C. power source (not included) which connects
either to the input terminal block or the 2.1mm D.C.
power jack located on the module. Two or more
outputs can be paralleled for additional current.

Features

• Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
• Master Power On/Off Switch.
• Visual LED Power Indicators on each Output.
• Convenient Test Points for measuring Total Current Draw.
• Lifetime Limited Warranty.
• Paintable White Plastic

Specifications

• Max Current Draw: PD9 = 250mA from each output.
• Max Combined Current Draw: Not to Exceed Input Power Source.
• Input/Output Voltage: 6 to 30 Volts A.C. or D.C.
• Input Connection: Screw Terminals or 2.1mm Plug-In D.C. Jack.
• Output Connection: Screw Terminals (POS and NEG) for each Output.
• Enclosure Size: 6.5" x 4.3" x 2".

Kit Part Numbers

PD9AC24 AC Camera Kit: Includes ELK-PD9 + ELK-TRG2440 24V AC, 40VA Transformer.
PD9DC12 DC Camera Kit: Includes ELK-PD9 + ELK-P1216 12V DC, 1.5A Plug-in Power Supply.
PO Box 100 • Hildebran, NC 28637 • 800-797-9355 • 828-397-4200
Fax 828-397-4415 • www.elkproducts.com • info@elkproducts.com
250mA rated outputs
400mA rated outputs
PD9HC = 400mA from each output.
ELK
PRODUCTS, INC.