Advertisement
Configuration Central Call Button and door opening
Open the web interface of the SIP Module via a web browser via IP address.
•
Navigate to the [Setup] (password: 1234).
•
Select [Centrall Call Module]: Yes
o
Navigate to [Call destinations] (password: 1234).
•
Enter the target for the Central Call Button identical to [Switchboard call]:
•
Name: (a name must be entered)
o
Number: (destination number or IP address for direct IP connection)
o
DTMF code: (code to trigger the door relay e. g. „0 - - -")
o
Incoming: (response to incoming call from this number)
o
Confirm your entries with [Save] (the SIP Module will restart).
•
Camera
IP Address:
•
Netmask:
•
Username:
•
Password:
•
Setting the IP address
Open the web interface of the IP camera in a web browser via IP address.
•
Default IP address: 192.168.1.220
o
•
Navigate to the [Configuration] (username: admin, password: 1234).
Go to the menu [General]
•
Enter your IPv4 address configuration - Ethernet:
•
IP address
o
Subnet mask
o
Gateway
o
Confirm your entries with [Save].
•
Display camera image or video stream
You have the following options to access the camera directly.
To display individual JPG pictures, use the following URL:
•
http://*username*:*password*@*Camera-IP*/jpg/image.jpg
o
With factory settings e. g.: http://admin:1234@192.168.1.220/jpg/image.jpg
o
To display a Motion-JPEG stream, use the following URL:
•
http://*username*:*password*@*Camera-IP*/mjpg/video.mjpg
o
With factory settings e. g.: http://admin:1234@192.168.1.220/mjpg/video.mjpg
o
4.
Support
For support please send an email to
or contact our support hotline +49 7172 9 26 13-99
192.168.1.220
255.255.0.0
admin
1234
support@baudisch.com
hardware version
1.9
COMPACTCLASSIC AHD
software version:
V8.6 / V3.6
QUICKSTART
4 / 4
Advertisement
