Advertisement
Quick Links
Laser harp manual
PHOENIX Showcontroller GmbH & Co.KG * www.Phoenix-Showcontroller.de
Reproduction and publication of this document, in whole or in part not allowed without
the express permission of the publisher. Amendments and errors reserved..
© 2012 All rights reserved
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for PHOENIX Showcontroller PHOENIX4
- Page 1 Laser harp manual PHOENIX Showcontroller GmbH & Co.KG * www.Phoenix-Showcontroller.de Reproduction and publication of this document, in whole or in part not allowed without the express permission of the publisher. Amendments and errors reserved.. © 2012 All rights reserved...
- Page 2 Phoenix4 laser harp Connect the laser harp as described in the installation manual. Be sure to place the sensor in a convenient angle (about 45 degrees) to the laser beam output.
- Page 3 „Settings>Mode>Harp“ from the top menu. You get the dialog window that Phoenix4 Live needs to be restarted. Confirm this by clicking „Yes“. Then you get the chance to save the last changes. Phoenix4 Live starts with the harp optimized user interface.
- Page 4 You can now trigger the animation in Phoenix4 Live by interrupting the laser generated harp strings. The effect banks at Phoenix4 Live are switched automatically if you change the banks at the laser harp controller and an animation is triggered by interrupting the laser beams.
- Page 5 Phoenix4 laser harp Please email suggestions, wishes and questions to support@phoenix-showcontroller.de. www.phoenix-showcontroller.de...
Need help?
Do you have a question about the PHOENIX4 and is the answer not in the manual?
Questions and answers