Table of Contents
Advertisement
To pair your headset with your
mobile phone
1
Make sure your headset is charged and
turned Off.
on/off
Make sure your mobile phone is on and its
Bluetooth feature is enabled.
Press On/Off on the right earpiece
until the LED starts blinking red and blue
alternately. The headset will now remain in
"pairing mode" for 5 minutes.
Check your phone's user manual for specific
details.
charging socket
• Access the Bluetooth menu on your mobile
• Select the option to discover, add or search
• Upon selecting the "Philips Tapster" on your
After successful pairing, the headset will connect
to the mobile phone. You will hear a long beep
to confirm successful pairing and the headsets
LED will change from flashing red/blue to
periodically flashing blue every three seconds.
LED
Pair the headset with your mobile phone as
described below. A sample pairing is shown
below.
phone typically called "Setup", "Settings",
"Bluetooth" or "Connectivity".
for a Bluetooth device. After a few seconds
your phone should indicate that it has found
the "Philips Tapster".
mobile phone typically you will need to
confirm the pairing and enter a passcode.
Please enter the headsets passcode "0000"
(four zeros).
11
Advertisement
Table of Contents
