NSL LED Neon Flex Installation And Safety Instructions

INSTALLATION GUIDE
D) Insert the joined pieces into the aluminum base of the
connector.
E) Apply silicone glue on top of the joined pieces, and on the
connector's clear cover.
F) Place the clear cover on top of the assembly, and tighten
the screws. Wipe the excess of silicone with a clean towel.
NOTE: for installation of L, and T type connectors, please
follow the same procedure outlined above.
INDOOR/OUTDOOR DIMMABLE DRIVERS
TRE24L40DC
• Max recommended load 36W, min 8W
• 6.77" x 2.67" x 1.26" (171 x 68 x 32mm)
TRE24L96DC
• Max recommended load 90W, min 8W
• 6.77" x 2.67" x 1.26" (171 x 68 x 32mm)
NON-DIMMABLE DRIVERS
LEDDR-24-120W (Indoor/Outdoor Driver)
• Max recommended load:
90W per single tap
120W combined two secondary taps
• 120W hardwire
• Input: 100-240V AC
• Output: 24V DC
• 10" x 3 3/8" x 3 3/16" (254 x 85.7 x 80.9mm)
NON-DIMMABLE PLUG-IN DRIVERS
LMS-24-18W and LMS-24-60W
ACCESSORIES
NFLX-CONKIT-6FT NFLX-JUMP
(Power feed connector, 6FT) (Jumper connector, 15CM [6in])
NFLX-SPLICE NFLX-L-SPLICE
(In-line splice connector) (L splice connector)
NFLX-ENDS NFLX-CLIPS
(End cap) (Mounting clips)
NFLX-PINS
(Single color pins)
Neon Flex
NFLX-T-SPLICE
(T splice connector)
NFLX-CHANNEL
(Aluminum mounting
channel 1M [3.28FT])
Applications:
• Building outlines
• Stairway and aisle lighting
• Signs
• Decks
• Pathway Lighting
• Billboards
• Highlighting architectural features
LED
NFLX-XX-YY
www.nslusa.com