Maintenance - Lanaform MEN’S TRAVEL SHAVER Instructions Manual

2
3
4

MAINTENANCE

Cleaning
1) Disconnect the shaver from the power socket and wait for a
few minutes before cleaning it.
2) Press the two buttons on each side to remove the protective
shield.
8
2) The "On/Off" switch has a locking
button to prevent any accidental use.
To switch the shaver on, unlock the
button and slide the switch towards
the top of the shaver.
3) Hold the shaver at a right angle (=
90°) to the surface of your skin. Start
shaving by applying a light pressure
to your face.
4) Tighten the skin with your free hand
and move the shaver in the direction
of your beard.
Comment: Applying excessive
pressure will not give a closer
cleaner shave and may damage the
shaver as well as your skin.
5) To switch the appliance off after use,
slide the switch towards the base
of the shaver.
6) To prevent damage to the perforated
grid and cutting blades, make sure to
always replace the protective cover
when you have finished shaving.