Page 1
DC S RANSCRANIAL TIMULATION ROTOCOL UIDE For use with the Oasis Pro...
Page 2
The use of the Oasis Pro as a tDCS device is solely the responsibility of the user. If you would like more information about our products and research on AVE and CES, visit our website at www.mindalive.com.
Page 3
See Dave’s tDCS article at: https://mindalive.com/tdcs/ The effectiveness and comfort of the Oasis Pro tDCS is based on a current density of 50 μa/cm for the small and long thin active electrodes, and less than 20μa/cm...
Page 4
SESSIONS STARTING A SESSION The tDCS sessions on the Oasis Pro have their own session group to distinguish them from CES/MET sessions. until the tDCS light comes on. Use the INT highlight a tDCS session and press to start the session.
Page 5
USING tDCS CONNECTION TEST When a tDCS session first starts, the OASIS Pro checks the electrical connection by entering test mode just as it does for the CES sessions. The graph will display one of the following codes to indicate the status of the connection.
Page 6
USING tDCS IMPORTANT If at any time the client has an adverse reaction, disconnect one or both electrodes or unplug the cable to pause the session. You may also press the power button to end the session. Unlike CES, the intensity cannot be manually adjusted and preferences cannot be set for tDCS sessions.
Page 7
Each of the sessions will take 8-10 seconds to program. • Check the Oasis Pro to ensure that all 6 sessions are available in the tDCS session group. If the sessions have not downloaded correctly, adjust the volume and try again.
Page 8
Mind Alive Inc. 800.661.MIND(6463) 6716 75 St NW 780.465.MIND(6463) Edmonton, Alberta info@mindalive.com Canada T6E 6T9 www.mindalive.com...
Need help?
Do you have a question about the Oasis Pro and is the answer not in the manual?
Questions and answers