Table of Contents
Advertisement
Quick Links
Optipay® CC
JCM Training Overview
P
A66US (C
)
ALM
ONTINUED
Figure 39 Recycler Status Screen
A-66 PARTS LIST
Part Number - Description
• 870- 000003
A-66 Centaur Coin Changer Unit
• 400-100219
Palm Dongle Interface Cable Assembly
• 450-100181
RJ-45 F/F Cat 5E Adaptor
• 701-000174
Includes both of the above two items (Dongle Cable & Adapter)
as a kit
• 400-100218-C 8 inch Blue RJ-45 M/M CAT 5E extender cable
• 900-100164
WINMDB Kit with MDB simulator, power sup, software & cables
• 960-000128
Optipay System Quick Reference Flip Book.
Thank You for choosing JCM products
JCM is a registered trademark of JCM American Corporation. All other product names
mentioned herein may be registered trademarks or trademarks of their respective companies.
™
®
©
Furthermore,
,
and
are not always mentioned in each case throughout this publication.
925 Pilot Road, Las Vegas, Nevada 89119
Office & Tech. Support: (800) 683-7248 (option 5 after hours), FAX: (702) 651-0214
E-mail: techsupport@jcm-american.com http://www.jcm-american.com
Part No. 960-000153R_ Rev. A
December, 2006
Figure 40 Alt View Recycler Status
Screen
© 2006, JCM American, Corporation
2 8
JCM TRAINING
OVERVIEW
OPTIPAY
A-66 Coin Changer
Phone # (800) 683-7248
(702) 651-0000
Technical Support # (702) 651-3444
Fax # (702) 651-0214
E-mail optipaysupport@jcm-american.com
Web Address http://www.jcm-american.com
Part No. 960-000153R_ Rev. A
December, 2006
CC
®
© 2006, JCM American, Corporation
1
Advertisement
Table of Contents
Summary of Contents for JCM A-66
- Page 1 Thank You for choosing JCM products Phone # (800) 683-7248 (702) 651-0000 JCM is a registered trademark of JCM American Corporation. All other product names mentioned herein may be registered trademarks or trademarks of their respective companies. Technical Support # (702) 651-3444 ™...
-
Page 2: Table Of Contents
A-66 Chassis Components................. 8 • provides a list of errors reported by the A-66 Coin Changer. This Error List: Sensors & Coin Validation ............9 is the same data that is obtained using by using the Palm Stat program. -
Page 3: Overview
Payout Module: • Inhibit Switches: provides a visual reproduction of the DIP Switch located on the rear of the A-66 Validator head, and indicates the 'ON/OFF' status of each switch. Figure 1 A-66 Centaur Coin Changer Lecture Notes Lecture Notes Part No. -
Page 4: A-66 Coin Validator/Dispenser Features
Button will yield the Figure 34 Teach Token Sub-menu Screen.The user is The A-66 Coin Validator/Dispenser contains the following features: • Manufactured for JCM by NRI (Crane) as the A-66 Centaur and is technically provided the option to “Teach” a new token or to change the attributes of a similar to the NRI E-66 and G-46 previously existing taught token. -
Page 5: Safety Precautions
SAFETY PRECAUTIONS A66US (C ONTINUED Specific A-66 installation safety precautions to observe are: • To remove power from the vending machine prior to removing, installing, or replacing subassemblies on the Coin Changer • To never connect or disconnect the 6-pin MDB Harness Connector from the Coin Changer while power is applied •... -
Page 6: Unit Installation
The validator may now be pulled out of the A-66 assembly. 4. Disconnect the ribbon cable from the rear of the unit and temporarily set the Figure 28 Other Settings Screen Validator unit aside. -
Page 7: Mechanical Layout & Components
DBV-301 NOTE: The values represented on this screen are only valid if an optional RC-10 – Switch 10 ON = MDB Level 3 A-66 operation. Recycler is present mounted on a DBV-301 Bill Validator and the ‘Recycler active’... -
Page 8: Mechanical Layout & Components (Continued)
Figure 26 will appear. This screen represents the current coin tube sorting configuration in use by the Coin Changer. The particular example shown indicates a tube configuration of 'nickel, dime, quarter, quarter', Figure 3 A-66 Features although the configuration for your unit may be different. Lecture Notes Lecture Notes Part No. -
Page 9: Sensors & Coin Validation
Coin Changer via the Coin Return Slot. to be incremented by one (1) or ten units (10) at a time. Lecture Notes Lecture Notes Part No. 960-000153R_ Rev. A © 2006, JCM American, Corporation... -
Page 10: Maintenance & Cleaning
Figure 20. Select the desired functions and then click on ‘Send’ to program the LEANING ROCEDURE A-66 Coin Changer. Selecting ‘Cancel’ will return you to the ‘Settings’ menu. Perform the following steps to clean an A-66 Coin Changer: A description of each function is provided in the Operating Modes Menu are as 1. -
Page 11: Led Indicators & Troubleshooting
— • A-66 is in the 'coin filling mode'. Coin filling mode is 1. Connect the Palm PDA to the A-66 using the Palm Dongle Cable Assembly. Green LED flashing 2. Run 'Palm A66US' (See Figure 17 a). entered by pressing the Plus Keypad Button one (1) time. - Page 12 'payout complete' operation. If a payout error occurs due to jammed coins in a Payout Tube or a motor problem, the A-66 will attempt to clear the problem and retry three (3) times before timing out.
-
Page 13: Downloading Palm Pilot® Applications
® • Data read out takes only a few seconds using a Palm Pilot PDA. • An Application used to load operating software into the A-66 Coin Changer Using Palm Stat to read out data: • Software file required: Palm Flash Perform the following steps to read data from the A-66 memory: •... -
Page 14: Palm Pilot Applications
LASH PPLICATION ONTINUED LASH • Palm Flash is an application used to load operating software into the A-66 Coin Changer • The Flash Memory size of the A-66 is 32K bytes in size ® • Download takes about 40 seconds using a Palm Pilot PDA.
Need help?
Do you have a question about the A-66 and is the answer not in the manual?
Questions and answers