Page 1
Bone Conduction Wireless Earphones (BTS31) Thank you for purchasing the Valore Bone Conduction Wireless Earphones (BTS31). • Suitable for indoor/outdoor use • Up to 6 hours playback time • Open-ear design to stay alert to surrounding Important: Please read the user manual thoroughly before using your wireless earphones.
Page 2
Step 2: Press and hold onto the Power button (Right button) until the LED light flickers red and blue. Step 3: Connect to the headphones by selecting ‘Valore BTS31’ under the device list. Step 4: Once connected, the LED light at the Bluetooth button will blink blue in interval of 5 seconds.
Page 3
3) Wireless headset controls a) Chinese to English switch The power is not connect, and there is no pairing status. Press the left and right button together. When the prompt tone is heard, the switch is successful. b) Play/Pause music While in standby, click the left or right button to operate the player on phone.
Solution: Fully charge the headset (2.5 hours) and retry connection with your mobile device. Problem 2: Headset not paired to your mobile device Solution: Make sure that the headset is successfully paired upon selecting ‘Valore BTS31’ in the device list.
All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes.
Need help?
Do you have a question about the BTS31 and is the answer not in the manual?
Questions and answers