Advertisement
Quick Links
Advertisement
Summary of Contents for LotusRC PTZ-F
- Page 1 PTZ-F Brushless gimbal user manual(3-axis) V1.0 2013.12.02...
- Page 2 Introduction: PTZ-F is a new three axis camera gimbal for ILDC; it is made by aluminum alloy. Light weight and easy to use. it is can use for SONY NEX-3、5、7 and related Sony products. It is very stable for aero photography.
- Page 3 Shooting: Camera gimbal cannot output film picture; should supervise it on the ground; should add HDMI convert AV mode. The mould will be provided soon (optional) The HDMI output of camera set up: 1. Make the camera HDMI Resolution ratio setup ”Automatic“，save it ,exit the camera setup menu.
- Page 4 Camera HDMI convert module, video transmission connection: 1. turn off the camera power. 2. make HDMI Convert module insert into camera HDMI output port. 3. make HDMI Convert module ‘s output connect to video transmission’s transmitter.
- Page 5 Receiver connection: PTZ will need to enter the pitch, YAW two-way remote control signal to control the camera's pitch and yaw action. Roll automatically. PITCH Suggest model： 1. T700G 2. T1000G 3. T1000V Camera gimbal Lipo battery suggest: 3S 2200Mah 25C Lipo battery Precautions: The center of gravity of camera is very important for brushless gimbal, please adjust gravity before install camera on it, please do not power on gimbal, otherwise will make gimbal control board...
- Page 6 Camera gimbal structure chart:...
- Page 8 Gimbal installation: 1. Install the gimbal on T700G, T1000.Use the screw pillar to connect...
- Page 9 2. Install to other multicopter frame, use the common parts. Feedback: If you have any questions and suggestion about our products .please feel free contact us Website: www.lotusRC.com www.lotusRC.net Skype: F490905002 Mail：flying.yan@163.com...