Page 2
...describes the installation of the wibutler pro as well as individual settings. A quick start guide has been added to your wibutler pro already. You should read this manual thoughtfully before using your smart gateway for the first time. Please mind the safety instructions.
Table of content Shipment Overview of wibutler pro Connecting the cables Ideal installation site Overview of supported radio systems App download Logging in Logging in as user 6.2. Logging in as service partner Setup assistant Online portal Firmware update Forgotten password...
The power supply unit, ethernet cable and wall mounting kit included may not appear exactly as depicted. If you would like to mount your wibutler pro on a wall, the drillings match the distance between the holes that result from using a Din A4 puncher.
2. Overview of wibutler pro Audio output Service button Gigabit ethernet port Power port USB 2.0 port Audio output (3,5mm jack) For connection to external speakers or a stereo system. The volume of internal speaker and audio output can be set seperately via wibutler app. The external output must not be used for connecting external speakers (headphones excluded), as long as they are not equipped with an own amplifier.
Page 6
Top side: rotatable logo Back side: Speaker Bottom: Wall mounting Product label / Master key and LAN MAC...
Connect the wibutler pro to a power outlet using the power supply unit included. The wibutler pro is ready for use as soon as the status LED emits a steady white light and a greeting tone has played.
The wibutler pro should be placed in a clear area that is as centrally located as pos- sible. The device should be positioned so as to minimise the distance between it and any products to which it is linked. Walls, ceilings, and large furniture should be borne in mind, since these can affect the range of the wireless signal.
4.1 Overview of supported radio systems Range Frequency (MHz) (indoor/outdoor) Number of addable devices EnOcean 30/100 Smart ACK devices: 15 Actuators: 126 Sensors: unlimited Z-Wave 30/100 Devices: 232 ZigBee 2400 10/50 Devices: an almost unlimited number of devices. More than 100 added devices might cause technical limitations however, depending on the spatial distribution of the sensors.
5. App download To download the wibutler app, simply visit www.wibutler.com/getstarted with a smart- phone or tablet in order to reach the App Store and Google Play. Once successfully downloaded, the wibutler app icon will appear on the home screen of the device in use.
(e.g. forgotten password), the admin mode can be activated by pressing the service button on the back of the wibutler pro. You can now log in as „admin“ using the master key. This feature enables a system access via admin pass- word.
For warranty and security reasons, service partners can only configure and connect professional products to the wibutler pro through the service mode. Note 1: Rules or products set or configured by a service partner will be indicated by a lock icon in the standard user interface.
The admin account remains, but will be deactivated (9. Forgotten password). If you want to operate your wibutler pro online you need to create a wibutler ID. Online connection is recommended in order to receive update notifications. Updates can only be downloaded when connected to the internet.
After the download has been completed, press „Install“. Your wibutler pro will now be shut down. • After the wibutler pro has completed the firmware update, the LED on the front of your wibutler pro will emit a white light. •...
10. Forgotten password To reset the password, press and hold the service button (with the enclosed service tool) for 5 seconds; promptly release it as soon as the sound “admin” is heard and the status LED emits a yellow light. Once the status LED blinks yellow, it is possible to log in with the username “admin”...
As soon as the status LED emits a pink light and “access point” sounds, promptly relea- se the button. The wibutler pro is now set to access point mode (the status LED will resume a steady white colour and “access point on” will sound). The device can now be located among available networks.
12. Statusabfrage The status LED on the front of the wibutler pro indicates system statuses and errors by shining and blinking in different ways. Mode Colour Meaning white - steady light System ready Admin mode active; blinks until yellow - blinking slowly mode is terminated Access point mode active;...
If the resetting process is terminated successfully, LED will blink green for 3 se- conds, the wibutler pro will automatically restart. • If an error occurs during the process, LED will emit a steady red light - after 30 seconds, the wibutler pro will restart and the process has to be repeated.
Storage When not in use, the wibutler pro should be stored in its original packaging in a cool, dry location, between +5°C and +40°C. The device should reach room temperature before being operated.
Page 20
To avoid reflections when working in front of a screen, this product must not be placed in the immediate vicinity of the visual field. Requirements The wibutler pro meets the requirements of the current European and National terms of reference. Electrical and electronical products should be disposed of separately from the muni- cipal waste stream via designated collection facilities appointed by the government or the local authorities.
15. Technical data wibutler pro Power supply 100-240 V AC voltage/50-60 Hz Max. power consumption 18 W; 1,5 A at 12 V 1x 3,5 mm stereo output Ports 1x gigabit ethernet RJ45 1x 2.0 USB port EnOcean/ 868 MHz Z-Wave / 868 MHz...
16. Warranty Beyond the liability of defects, iEXERGY guarantees the durability of wibutler products, as long as they were installed by an iEXERGY certified craftsman, for 15 months, starting with the date of purchase. Warranty includes all construtional, material and manufactural defects. Existing guarantee rights will not be affected by this warranty contract.
Page 24
16. Warranty Beyond the liability of defects, iEXERGY guarantees the durability of wibutler products, as long as they were installed by an iEXERGY certified craftsman, for 15 months, starting with the date of purchase. Warranty includes all construtional, material and manufactural defects. Existing guarantee rights will not be affected by this warranty contract.