1. Manuals
  2. Brands
  3. Quicksilver Manuals
  4. Microcontrollers
  5. QCI-SKB-N2-EE
  6. Technical document

Quicksilver QCI-SKB-N2-EE Technical Document

Start-up kit setup instructions
Hide thumbs
1
2
3

Advertisement

Table of Contents

Technical Document:QCI-TD042
Date: 5 November 2008

Start-Up Kit QCI-SKB-N2-EE Setup Instructions

This SilverLode Start-Up Kit provides a simple means to evaluate and prototype an I-Grade
SilverNugget N2 controller/driver (included). The Basic Breakout Module (QCI-BO-B)
connects directly onto the SMI port on the SilverNugget, which breakouts the servo's power,
I/O, and communications plus easy connection to a PC serial port.
This kit includes:
• SilverNugget N2 (QCI-N2-E3-04-EE) & Datasheet (QCI-DS005)
• QuickControl Software CD (QCI-QC)
• User Manual & Command Reference (QCI-SLM)
• Basic Breakout Module (QCI-BO-B) & Tech Doc (QCI-TD036)
• Communication Cable (QCI-C-D9M9F-6)
• 4' DB15HD Motor I/F Cable (QCI-C-D15P-D15S-4)
• Start-Up Kit Setup Instructions (QCI-TD042)
Technical document QCI-TD036 contains details on the Basic Breakout Module specifications.
Connections refer to the I-Grade SilverNugget N2 controller / driver - used with NEMA 17 or 23
frame motors.
Property of QuickSilver Controls, Inc.
QuickControl® and QCI® are Registered Trademarks of QuickSilver Controls, Inc.
SilverLode™, SilverNugget™, SilverDust™, PVIA™, QuickSilver Controls™, and AntiHunt™ are trademarks of
QuickSilver Controls, Inc..
Basic Breakout Module (QCI-BO-B)
9 Pin (Socket) Comm
Connector
Page 1 of 3
QuickSilver Controls, Inc.
www.QuickSilverControls.com
Note: Motor Not Included
15 Pin (Socket)
SMI Port
This document is subject to change without notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QCI-SKB-N2-EE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Quicksilver QCI-SKB-N2-EE

  • Page 1 Property of QuickSilver Controls, Inc. Page 1 of 3 This document is subject to change without notice.  QuickControl® and QCI® are Registered Trademarks of QuickSilver Controls, Inc. SilverLode™, SilverNugget™, SilverDust™, PVIA™, QuickSilver Controls™, and AntiHunt™ are trademarks of QuickSilver Controls, Inc..
  • Page 2 QuickSilver Controls, Inc. Technical Document:QCI-TD042 Warning: Make sure the power supply is OFF before making any connections 1. Connecting the SilverNugget N2 to a 17 or 23 frame motor/encoder using the motor interface cable (QCI-C-D15P-D15S-nn). a. Attach the pin side of the motor interface cable to the SilverNugget SMI port.
  • Page 3 QuickSilver Controls, Inc. Technical Document:QCI-TD042 3. Install QuickControl® and initialize servo (see Getting Started in the User Manual). Typical System Setup: QuickSilver Controls, Inc. Page 3 of 3...

Table of Contents