Wiring Instructions Use HDMI Cable from the television to the kiosk (male to male) and a standard or our recommended electrical outlet. *See Recommended Outlet Image We recommend the HDMI be run behind the wall in conduit this makes it easy to change out the HDMI cord in case of failure.
You will need to use the TV remote to change the display resolution on the TV so that the FITX Program takes up the entire TV screen. You may have to reach out to your TV supplier as the instructions to change the resolution for each TV model may differ.
Calibration Instructions You will see that the FitX Program will lock the system down. To Calibrate you will need to have the mouse and keyboard plugged in (this will be a tight fit to get them plugged in). 1. Connect a keyboard to the computer. 2. Press ctrl + alt + del.
Page 5
Sound, videos, and touchscreen are fully functional. The back two screws are placed to lock kiosk mount to bracket. Restart the computer and make sure the FitX Program runs on startup. How to exit out of FitX Program: 1. Connect a keyboard to the computer.