Advertisement
Quick Links
Advertisement
Summary of Contents for Mongoose JS500
- Page 1 Manual for JS500 MANUAL for JS500...
- Page 2 INTRO Manual for JS500 CONTENTS The contents could be changed to enhance the performance without notice. External USB Wi-Fi Front FHD Cam Power Cable Cam HD Main Body 32GB Micro SD Dongle and cable (3 Pin Connector Type) and cable...
-
Page 3: Part Descriptions
INTRO Manual for JS500 PART DESCRIPTIONS EXTERIOR Status LED LEDs showing system operating status Front Cam Front external camera connecting port (SMBL) Port Cam 1 Rear external camera connecting port Cam 2 Rear external camera connecting port External GPS Receiver connecting port I/O Port Data Input &... -
Page 4: Installation
INSTALLATION Before Install N o t e 1. Please set configuration and make sure JS500 is working correctly before installation. 2. Please check and confirm the proper spot before installation. 3. JS500 is designed as hidden installation type on small size It can be installed in Glove box, Bonnet, Dash Board and under Driving seat...etc. - Page 5 Micro SD Card correctly as the image. NOTE JS500 is using format free file system to provide more secure file system and extend SD card life. So, SD card must be formatted by JS500 exclusive PC viewer prior to use .
- Page 6 INTRO Manual for JS500 INSTALLATION Connect GPS Receiver Cable Connect GPS Jack into GPS port as the image. Push the camera jack and rotate it to fit and fix the jack. Connect Power Cable After above installation process, please connect Power cable to the Power Port.
- Page 7 INTRO Manual for JS500 INSTALLATION GPS & WiFi Working Status LED - When GPS is connected correctly and activated, Green LED will be blinking at 3 second interval. Power LED - When Power is connected correctly, Red LED will be ON...
- Page 8 INTRO Manual for JS500 DIRECT BATT. CONNECT BATT(+) ACC(+) Red Wire BATT(+) Connects Red wire of Power cable provided to regular Car Power in Fuse Box. (Ex : Emergency Lights, Interior Lights, Tale Lights...etc.) Yellow or White Wire ACC(+) Connects Yellow or White Wire of Power Cable provided to the fuse that power comes in when engine is started.
-
Page 9: Status Led
START Manual for JS500 STATUS LED Starts System When connected to power , "Red” , "Green“ & “Blue” LEDs are on while the system is booting up. ( Voice : System is starting) Closes System If you stop using the system and disconnect power, it records additional 1 seconds, and three LEDs are turned On. - Page 10 START Manual for JS500 STATUS LED LED on Each Mode Normal Mode - “RED” LED is always On. - ”GRN” LED indicates that recording is in progress. When the normal record mode , LED is blinking once at every 2 seconds.
- Page 11 START Manual for JS500 Recording Mode Recording Mode by Power Conditions Condition Rec. Mode Descriptions Normal Mode Normal Rec. Mode starts after 20 sec of engine on Engine OFF Parking Mode Parking Rec. Mode starts after 20 sec of Normal Recording Normal Rec.
- Page 12 START Manual for JS500 Recording Mode File Name Generation (Y: Year, M: Month, H: Hour, M: Minute, S: Second, D: Driving, P: Parking, DI : Driving , DE : Driving Event, PM: Motion Event, PE: Impact Event, PT : Time Lapse)
-
Page 13: Led Indications
START Manual for JS500 LED INDICATIONS ITEM Blue LED Green LED Red LED LED Pattern Blink Interval Note Upgrade Blinking/ Blinking/ON 0.5sec/0.5sec 2m30sec Booting OFF/ OFF / ON 20sec OFF/ Blinking / ON 2sec No GPS GPS Disabled Driving ON / Blinking / ON... - Page 14 PC VIEWER Manual for JS500 PC Viewer Guide File Converting NxFS format to AVI and Save Minimize S y s t e Setting Image Capture Cam 1 I n f o Max Screen Play Speed Cam 1 View Close Cam 1 View...
- Page 15 PC VIEWER Manual for JS500 Configuration – Record Set Insert Micro SD Card, and select SD card drive. Then Configuration Setting button will be activated, then click it and Configuration Setting window pops up. There are two Configuration Settings, for Black Box (DVR)and Network.
- Page 16 To use Network with connecting Wi-Fi Router, please select Network Function “On”. Then Network Setting will be activated. FORMAT JS500 is using NxFS file format for Format Free and SD card using FAT must be formatted with this format button prior to use. Just Click this format button.
- Page 17 WIFI APP Manual for JS500...
- Page 18 WIFI APP Manual for JS500...
- Page 19 Manual for JS500 Self Diagnose Self-Diagnosis NOTE (Please read when sets Network)
- Page 20 GOOGLE is not available. Please check Micro SD, and also check if SD card has been JS500 is using external GPS receiver through cable. Please formatted to NxFS format(Format Free) prior to use. Micro check if the cable is connected correctly with the main SD Card has a life cycle.