Customize Settings - Philips LFH0633/00 User Manual

8

Customize settings

You can customize the settings of your Voice Tracer to suit the
recording conditions and your personal preferences.
1
Press the MENU button while the recorder is stopped.
• The display shows MODE and the current setting for recording mode
is flashing.
2
Press the + or – button to navigate the setting icons bar up or
down.
3
Press the h or b button to change the displayed setting. The
new setting is automatically accepted (exceptions: the FORMAT
and SPLIT functions must be confirmed by pressing the f
button).
4
Customize settings as required or exit the menu by pressing the
MENU button.
Icon/
Option Description
Display
SLP Choose among several recording modes
LP including HQ, SP, LP or SLP for a longer
SP recording time. Refer to chapter 11, Technical
HQ data on page 18 for details.
HI Adjust the recording sensitivity to avoid
LO recording background noises and to adjust to
MIC
the recording environment.

Table of contents
Icon/
Option Description
Display
On Voice-activated recording is a convenience fea-
Off ture for hands-free recording. When voice-
VA
activated recording is enabled, recording will
start when you begin speaking. When you
stop speaking, the recorder will automatically
pause recording after three seconds of silence,
and resume only when you begin speaking
again.
On Dynamic emphasis on quiet passages to
Off improve the intelligibility of quiet voices.
CLVOICE
Yes The recorder gives sound feedback about but-
No ton operations or errors.
BEEP
5 The Voice Tracer automatically turns off after
15 5 or 15 minutes of inactivity
AUTOOFF
14
Customize settings