Download Print this page

NightRider NRC-ISGL05-30W Manual

Smart solar led light

Advertisement

Quick Links

NightRider™ LEDs
Information
Your NightRider™ Smart Solar LED Light is a complete fusion of four amazing technologies:
1. High Efficiency LEDs
2. High Output Solar Panels
Highlights
Solar panels charge lithium batteries through the day when light is not needed.
Completely wireless installation into places that would normally be difficult to power.
Lithium batteries with high power capacity used to hold charge from the solar panels.
LED chips incredibly bright and energy efficient used to reduce drain from batteries, while
producing great illumination throughout the night.
Photocell sensor switch used to automatically turn on LEDs when environment is dark, and
switch off the LEDs when environment is light.
IP65 ingress protection rating allows outdoor use in all weather conditions.
Installation & Use
Make sure to turn on
Master Switch inside
mounting sleeve
before install.
Prepare location for installation.
1.
Ensure good light exposure from sun for
solar panel to charge.
2.
Mount away from areas that would
shadow the solar panels
3.
Inadequate sun light exposure will not
allow proper charging to allow light to
run.
4.
1-1/2" up to 2" Pipe required to mount
light
5.
Recommended installation height is
anywhere from 3m to 4m heigh.
Use
1.
Please refer to Remote Control
instructions for applying different
lighting settings.
2.
Keep solar panels clean. Clean off excessive dust, leaves, snow or other grit with soft cloth to
maximize sunlight absorption.
3.
Optimum charging conditions occur during direct sunlight at temperatures between 0 and 60ºC.
Temperatures below and above this range start to greatly reduce the efficiency of the solar panel to
charge the lithium batteries.
Storage
1.
Store smart solar light fully charged at temperatures between 0-60ºC up to a maximum of six months.
2.
Store smart solar light in a dry/clean location to prevent damage over time.
Smart Solar LED Light
3. High Capacity Lithium Batteries
4. Light Sensing Photocell
Light Power
Solar Panel Power
Photocell Sensor
Power Setting
Working time
Color Temperature
Temperature
IP Rating
Weight
Dimensions
Installation Height
Installation distance
Light Specifications
On in dark, Off in light
Up to 8 hours runtime
6500K - Cool Daylight
Charging
Using
-20℃-60℃
IP65 - Weather Proof
640(L)x250(W)x70(T)m
NRC-ISGL05-30W
30W
15W
100% power
50% power
0-60℃
3.7KG
3-6m
8-10m
1
of
2

Advertisement

loading

Summary of Contents for NightRider NRC-ISGL05-30W

  • Page 1 NightRider™ LEDs NRC-ISGL05-30W Smart Solar LED Light Information Your NightRider™ Smart Solar LED Light is a complete fusion of four amazing technologies: 1. High Efficiency LEDs 3. High Capacity Lithium Batteries 2. High Output Solar Panels 4. Light Sensing Photocell Highlights Solar panels charge lithium batteries through the day when light is not needed.
  • Page 2: Remote Control

    NightRider™ LEDs NRC-ISGL05-30W REMOTE CONTROL Smart Solar LED Light Button Index 1. ON/OFF - Master Switch; press this button to turn On or Off light in dark or light environment 2. ON (Photocell Switch) - Pressing this button will activate the Photocell Sensor Mode.