Advertisement
Overview
The Autonomic AMX version 1.0 driver for the Mirage digital amplifier,
models M-800 and M-400, is compatible with all recent versions of AMX
and all versions of the Autonomic Mirage digital amplifier firmware.
Autonomic Mirage digital amplifiers offer scalable multi-zone amplification
with 100 watts per zone. Each zone is individually controllable from an AMX
system using the Autonomic AMX driver.
The M-400 and M-800 digital amplifiers can be mixed in any configura-
tion and stacked up to 96 zones, providing an 8 source x 96 zone matrix
(M-800s) or a 6 source x 96 zone matrix (M-400s). The driver offers full
control over all aspects of a Mirage amp stack of any size.
This driver was developed and tested with Netlinx 4.1.1204 against
an NI-2100 running Netlinx v4.1.373 and TP4Design 3.3.0 against an
MXT-1000 running firmware v2.104.28 but is compatible with any NI series
processor and any G4 and G5 panel.
Features
Each zone of a Mirage amplifier is individually controllable and has many
features. The Autonomic AMX v1.0 driver offers full control over the
complete feature set per zone,
and source selection to advanced functionality like max volume, mono vs.
stereo, power on volume, bass, treble, balance, gain, and loudness.
MirageAudioSystem.com
from basic control like volume & mute, power,
AMX Driver v1.0 for Mirage Digital Amplifiers |
2 of 54
Advertisement
