1. Manuals
  2. Brands
  3. E-LINK Manuals
  4. Switch
  5. LNK-IMC208P-SFP
  6. Quick start manual

E-LINK LNK-IMC208P-SFP Quick Start Manual

Hardened unmanaged 8-port 100base-fx sfp + 2-port 10/100/1000base-t/sfp combo optical ethernet switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LNK-IMC208P-SFP
Hardened Unmanaged 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet
Switch
This quick start guide describes how to install and use the Industrial Unmanaged Optical Ethernet Switch. This is the
Switch of choice for harsh environments.

Overview

LNK-IMC208P-SFP is a unmanaged 8 ports 100Base-FX SFP + 2 ports 10/100/1000Base-T/SFP Combo
Optical Ethernet Switch. The Switch provides SFP slot to support the use of SFP (Small Form-factor
Pluggable) transceiver module. User can chose different types of SFPs (1000M only). The Switch
supports 1 or 2 core Single-mode or Multi-mode fiber. The product operates at temperatures ranging from
o
o
DIN-Rail installation
-40
C to 75
C and

General

To ensure trouble free transportation and storage, all E-link products must be thoroughly inspected, tested
and properly packed before delivery. Check the product upon receipt for any visible damage which may
have been caused during shipment.

Package Content

Hardened 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Unmanaged Optical Ethernet
Switch x 1
Quick Start Guide x 1
.
1
V1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LNK-IMC208P-SFP and is the answer not in the manual?

Questions and answers

Summary of Contents for E-LINK LNK-IMC208P-SFP

  • Page 1 C to 75 C and General To ensure trouble free transportation and storage, all E-link products must be thoroughly inspected, tested and properly packed before delivery. Check the product upon receipt for any visible damage which may have been caused during shipment.

  • Page 2: Physical Description

    LNK-IMC208P-SFP Hardened Unmanaged 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet Switch Physical Description Front Panel Rear Panel Installation SFP Optical Module You can select different SFP modules as required (Please refer to our SFP Ordering Options for the appropriate module).
  • Page 3 4. Pull down the SFP lever and hold its position. Pull out the SFP module from the SFP port. Din-rail Mounting LNK-IMC208P-SFP can be installed on a DIN rail. Installation steps are as follows: 1. First, insert the top of DIN-Rail into the track. 2. Then, lightly push the DIN-Rail into the track.

  • Page 4: Cable Connections

    LNK-IMC208P-SFP Hardened Unmanaged 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet Switch Setup Connect one end of the Ethernet cables to their corresponding ports on the product. Connect the other end to the network equipment such as IP cameras, Switches or PCs. Insert the SFP and connect the optical fiber cables to its connectors.

  • Page 5: Led Indicators

    LNK-IMC208P-SFP Hardened Unmanaged 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet Switch LED Indicators Indicator Color Status Description Green Powered on Powered on Green Power Failure or Port Down/fail Green Operating at speed 1000M Amber No network device is connected or not operating at speed of 1000M...

  • Page 6: Functional Description

    LNK-IMC208P-SFP Hardened Unmanaged 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet Switch Functional Description 8 100Base-FX SFP + 2 10/100/1000Base-T/SFP Combo with. • Combo port RJ45 support 10/100/1000Mbps Full/half-duplex, Auto-negotiation, Auto MDI/MDIX. • Supports external SFP. • Supports 802.3x Flow Control.

Table of Contents