Maintenance; Environmental Protection - Ryobi R18SW3 Original Instructions Manual

MaIntenanCe

WaRnIng
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
WaRnIng
When servicing, use only original manufacturer's
replacement parts, accessories and attachments. Use of
any other parts may create a hazard or cause product
damage.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
WaRnIng
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
WaRnIng
For greater safety and reliability, all repairs should be
performed by an authorised service centre.

envIRonMental pRoteCtIon

Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environment-
friendly recycling.
SyMBolS on tHe pRoduCt
Safety alert
V Volts
Direct current
Regulatory Compliance Mark (RCM). Product
meets applicable regulatory requirements.
Please read the instructions carefully before
starting the machine.
Failure to keep long hair away from air inlet
could result in personal injury.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice.
SyMBolS In tHIS Manual
Note
Parts or accessories sold separately
Unlock
Lock
Speed, minimum
Speed, maximum
The following signal words and meanings are intended to
explain the levels of risk associated with this product:
dangeR
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WaRnIng
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CautIon
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CautIon
(Without Safety Alert Symbol) Indicates a situation that
may result in property damage.
3