D-Link DP-G310 Quick Installation Manual page 3

Setting up your DP-G30 for network
printing in Windows XP
For additional Windows operating system setup or information on the web-management
interface, refer to the manual located on the CD-ROM.
The factory default IP address of the DP-G310 is 192.168.0.10. In order to net-
work to the printer through the DP-G310, the DP-G310 must have the same IP
network settings as your network. IP address can be assigned manually or auto-
matically by DHCP, BOOTP or RARP. To access the print server's web configura-
tion, manually assign an IP address on one of the wired PC's on your network to
the same subnet as the print server.
Go to Start > right click on
My Network Places
select Properties > Double-click on
the Network Connection associated
with your Network Adapter.
Click Internet Protocol (TCP/IP)
Click Properties
Input a static IP address in the
same range as the print server.
Select Use the following IP address
IP address: 92.68.0.52
Subnet mask: 255.255.255.0
Click OK
>
3