Getting Started - LapSafe indigodesk User Manual

The indigodesk - User Manual

3. Getting started

Remove any external packaging and locate the mains lead, keys and foam
'cable-manager' which are all inside the unit. Remove the transport-tape that is
securing the sliding door and open the door to find these items.
Locking / Unlocking the Front Door:
To lock / unlock the front door use the key with the GREY key cover. From the
un-locked condition and with the door slid shut, align the nib of the key with the
notch in the front of the lock at the 3 o'clock position and gently press the key
into the keyway until it stops. Whilst maintaining some pressure on the key, turn
it ¼ turn anti-clockwise to engage the door locks. The key may be removed from
the lock in the locked position.
The key can only be put back into the lock in the same position that it was
removed.
To unlock the front door is the reverse of locking. Insert the key and turn it to the
3 o'clock position to disengage the door locks. The door can now be slid to the
open position.
Opening the Rear Door:
To unlock the rear door use the key with the BLACK key cover. Align the nib of the
key with the notch in the lock and gently press the key into the keyway until it
stops. Whilst maintaining some pressure on the key, turn it ¼ turn to release the
door lock. Tilt the door and key towards you and look for the earth lead that is
connected to the door. Disconnect the push-on wire connection before lifting the
door out of the peg-holes across the bottom edge of the door.
To replace the rear door is the reverse of unlocking. Locate the bottom of the
door in the peg-holes, connect the earth lead, close the door and re-lock.
5
Copyright LapSafe® Products Limited