Advertisement
Quick Links
Advertisement
Related Manuals for ATEK MAKINA POLISH-CLN
Summary of Contents for ATEK MAKINA POLISH-CLN
- Page 1 English INSTRUCTIONS BOOKLET FULL AUTOMATIC RIM POLISHING AND CLEANING MACHINE POLISH-CLN...
- Page 2 A T T E N T I O N Please read this document carefully. The information which given this document is necessity for safely working and maintenance. Please keep this document for the possible further problems. THIS MACHINE Is designed for automatic tire changing operation.
- Page 3 PARTS OF THE MACHINE COMMAND GROUP CRADLE AND SUPPORT GROUP During the Operation İt makes During the Rim Polishing It provides to touch the you direct the machine. brush easily whole surface of the rim. MIRROR It provides you to fix the 12‖-28‖...
- Page 4 IMPORTANT NOTICES WARNİNG This instructions booklet has been prepared for the service stuffs and personal whom doing periodical maintenance. This instructions booklet contains important information about ; SERVICE STUFFS SAFETY MACHINE LIFE For the reason please save this handbook with machine. SAFETY WARNINGS DİKKAT ŞARTLANDIRICISIZ...
- Page 5 SAFETY WARNINGS - Take care that the voltage of the network of electrıcıty. ıt must be same voltage value ındıcated on the machıne label. - Have an electrıcıty tachnıcıan ınstall the thermal swıtch before the electrıc socket accordıng to the type of the electrıc motor on the machıne.
- Page 6 OPERATIONS AND USAGE 1 – FASTENING RIM — Do place on the centering Balancer of the Mirror — Press on the tightening Pedal which is showed with ―OK‖ to make stable the rim 2 – BRUSH FASTENING - Choose suitable brush which will be used on the rim and fasten it to suitable parts.
- Page 7 STOP STOP 8 – MIRROR ROTATION 7 – HORIZONTAL CRADLE GROUP — If you require to make the rotation of the mirror manual ,;Do turn — Do Move the joy stick forward and back which is the button with latch which is showed on the figure(A) to the showed on the figure to make move Horizontal direction where you require to turn the mirror...
- Page 8 ELEKTRICAL PLAN 380 V 24 V POLISH ENGINE...
- Page 9 MOTION MOTION POLISH START/STOP RIGHT/LEFT START/STOP EMER STOP HYDROLIC MOTION ENGINE ENGINE...
- Page 10 PACKING, TRANSPORT AND STORAGE There is no responsibility of the manufacturer because of the accident and damage, which is happened the assembly without dont’t read the manual. PACKING These machınes has packed wıth the wooden cases on the pallet. LIFTING AND CARRYING The machınes must carry wıth the forklıft or other sımılar carrıer.
- Page 11 MAINTENANCE DAILY Check the cable of the machıne before the runnıng. Check the machıne ıf the machıne ıs clean and maıntenance ıs completed. Check the pneumatıc cylınder agaınst the aır leakage. Do check If there is oil leakage or not in Hydraulic cylinder and oil tank. WEEKLY Check ıf the daıly maıntenance ıs done systematıcally.
- Page 12 STANDART ACCESSORIES AND CONSUMABLES FOR POLISH CLEAN MACHINE 1 CONNECTION ADAPTERS (STANDART ACCESSORY) A ) Main connection body B) Universal connection chuck C) Chuck connection screw D) 22 mm Long connection socket E) 22 mm Short connection socket F) 14 mm Connection socket G) 22 –...
- Page 13 5 BLACK PAINT REMOVER (CONSUMABLE) Black paint remover is used to remove the paint on the steel and iron rims 6 COMBI MOP CARPET SANDER (CONSUMABLE) Combi mop is used for preparing the surface before finish 7 COMBI FLAP CARPET SANDER (CONSUMABLE) Combi flap is used for preparing the surface before finish It makes the same job like combi mop but the reach...
- Page 14 ATTENTION IMPORTANT NOTES : Consumables which are supplied with the machine are not under warranty The consumables which are supplied with the machine are not enought to polish the rim For a professional polishing it is needed to use many different consumables and to use the necessary consumables for different rim types The standart accessories supplied with the machine may not be enough for you job.
Need help?
Do you have a question about the POLISH-CLN and is the answer not in the manual?
Questions and answers