Table of Contents
Advertisement
Available languages
Available languages
6. basic oPeratioN
6. bASIc OpeRAtION
initial system starts up
Operating the unit for the first time or after replacing the car battery, Press RESET button with a
pointed onject (such as ballpoint) to set the unit to initial procedure.
NOTE: When some errors occur in the LCd display, you can also press RESET button to resume to
normal. And it will erase the clock setting and some memorized functions.
turning the unit oN/oFF
Press
button to turn on the unit. When the unit is on:
• Short press
button, turn off the monitor, press
button again to turn on
the monitor.
• Long press
button to turn off the unit.
Volume control
Turn the VOLUmE +/ - button for increase or decrease the sound volume.
moDe/NaVi button
• Shortly press to select playing mode;
• Long press to start NAVI function
mute Function
• Press remote control mUTE/EJECT button shortly to cut down the sound output, and "mUTE"
icon appear in the LCd display.
• Press it again to restore previous volume level.
• Long press the to eject the disc.
touch screen calibrate
If the position of touch occurs warp, you can ca-
Touch + to adjuct panel.
librate by pressing the the "+"cursor. access the
touch screen calibrate mode interface.
+
• Click the icon
to
to access the touch
screen calibrate mode interface
• Click the icon "Enter" Setting on the mode
interface.
36
6_CP0000_v1_rv0_CV.indb 36
09/09/2014 14:37:52
Advertisement
Table of Contents
