Advertisement
Quick Links
Advertisement
Summary of Contents for Unimes U4
- Page 1 Unimes technology co. LTD www.Unimes.net...
- Page 2 Welcome to Unimes hand held terminal, this "getting started guide" will tell you how to use Unimes hand held terminal correctly. You can learn more about Unimes iot hand held terminal on the website:www.Unimes.net.
- Page 3 Remove and install battery cover mportant note: Unimes hand held terminal USES a toggle switch to fix the battery cover. In order to avoid unnecessary damage to the body, please follow the instructions of the user guide. Open the battery cover...
- Page 4 1.Turn the lock on the battery cover to the FREE position 2. Open the battery cover as shown in the picture Close the battery cover 1. Follow the steps shown in the figure...
- Page 5 2. Push the LOCK button of the battery cover to LOCK position Disassembling battery Important notice: the battery should be loaded and removed according to the instructions in the user's guide to avoid unnecessary damage to the body or the battery. Install battery: 1.
- Page 6 2. Pull the battery outward Install SIM card and TF card Unimes hand held terminal adopts SIM card provided by mobile operators (such as China mobile, China unicom and China telecom), and the SIM card must have opened mobile data service, otherwise the mobile data transmission function of this product will not be used.
- Page 7 Note: only SIM card 1 can hold telecom card;...
-
Page 8: Precautions For Use
Product installation precautions ※Disassemble and install Please do not disassemble or modify the equipment parts without authorization. If the equipment is damaged as a result, the company will not assume the warranty responsibility. ※External power supply Please use the power charger, otherwise the equipment may be damaged. ※Abnormal condition Stay away from the fire source. -
Page 9: Battery Usage Precautions
distance for 10-15 cm), make the width of the beam width is greater than the appropriate bar code, get the best effect of reading code, bar code data. As you can see, Battery usage precautions 1. You are recommended to charge the battery before using this product. Typically, new batteries achieve their best performance after several rounds of full charging and discharging. -
Page 10: Frequently Asked Questions
5. The temperature is too high or too low, which will affect the battery charging. It needs to be cooled or heated before charging the battery. 6. The battery level is indicated in the upper right corner of the screen. When the indicator icon is displayed as one grid, it means that the battery power is very low, and the screen will prompt "insufficient power, please timely charge". - Page 11 operation. Next, adjust the distance and Angle of the scan; Finally, check that the scan window is clean (dust and water droplets). 4. The screen does not display the processing method Check if it is turned on, or if the battery is out of power or has poor contact.