Do you have a question about the ProLine Touch Basic and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Ravas ProLine Touch Basic
Page 1
Weighing Terminal For Hand Pallet Truck We would like to inform you about the fact that this RAVAS product is 100 % recyclable on the basis that the parts are processed and disposed off in the right manner. More information can be found on our website www.ravas.com.
Page 4
Please Note: While every precaution has been taken in the preparation of this manual, RAVAS Europe b.v. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Introduction The Weighing Hand Pallet Truck 1.1.1 Startup Press -key to switch the terminal on. After approx. 3 to 5 minutes the electronics and the loadcells have reached their operating temperature. Before that deviations of up to 0.3% may occur.
1.1.3 Maintenance The calibration of every scale must be checked at regular intervals. RAVAS recommends maintenance of the weighing system once a year. Scales subject to Weights & Measures approval must be verified with certified test weights every year by a certified organization.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Weighing Terminal This manual describes the basic functions and the operation of the Proline Touch weighing terminal with the operator interaction in the individual steps of the operating sequence. The terminal is intended for connection to 12 V DC power supply (–15%) to 30VDC (+10%).
Operation Manual RAVAS Proline Touch Basic Rev. 6 Weight Display And Scale Function Keys Electronic marking plate Net w eight Charge st at e symbol (bat tery operat ion) Min load Division e / d Unit Max load Scale-No. /...
Operation Manual RAVAS Proline Touch Basic Rev. 6 Weight Display Scale-No. No. Of Weighing Range W1.1 … W1.3 partial weighing range for multiple-range scales. No-Motion Symbol Settled weight (printing / storing enabled). Gross Weight Or e.g. 1250 Switching from gross weight to Net Weight e.g.
Page 12
Operation Manual RAVAS Proline Touch Basic Rev. 6 With the '123...' key the layout can be switched back to the template for numeric inputs.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Operation Of Scale Functions Preset Tare (PT) After pressing the PT-key, the template for numeric inputs is opened and a tare value can be entered and confirmed with the Enter-key. Display of net weight in the main display and of tare weight in the auxiliary display.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Operation Via Display And Keyboard Power On Press -key to switch the terminal on. After switching the terminal on, automatically the power up messages are displayed, then the program proceeds to the template 'main menu'.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Special Functions For Mobile Weighing The weighing terminal features a power save mode and remains in sleep mode when external power is on. To switch the terminal on press -key. Power off on battery low If the input voltage falls below 11.3 V a blinking 'Battery Low' signal is shown.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Operating Sequence Operating Mode 'Weighing' In the operating mode 'Weighing' the terminal works as a simple indicator with optional entry of IDs. Automatic and manual taring is supported as well as zero setting. On keystroke, capturing of weight is started and -if applicable- depending on the configuration in the menu 'Data input/Settings/General' a ticket is printed, a data string transmitted and a record stored in the internal memory.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.1.2 Weighing: Input Of ID Entry step for ID. Abort entry, changes are ignored. Confirm entry. 6.1.3 Weighing: Load Scale This message appears when the weight on the scale is below the min. load or if it is not different from the weight of the previous weighing.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Operating Mode 'Counting' In the operating mode 'Counting' the weighing terminal works as a simple parts counting station with optional entry of IDs. On keystroke capturing of weight is started and -if applicable- depending on the configuration in the menu 'Data input/Settings/General' a ticket is printed, a data string transmitted and a record stored in the internal memory.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.2.2 Counting: Select Product Select product from file. Show previous record in file. < Show next record in file. > Delete record from file. Delete Create new record in file. Store changes.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.2.4 Counting: Tare Memory Select tare weight from tare memory. Select previous record in tare memory. < Select next record in tare memory. > Delete record from tare memory. Delete Create new record in tare memory.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.2.5 Counting: Calculation Of Average Piece Weight Capturing of average piece weight by adding / removing parts. Return to previous menu. Back Change the preset number of 10 parts. Parts Confirm displayed number of pieces.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Operating Mode 'Loading / Unloading' In the operating mode 'Loading / unloading' the weighing terminal works as a data capture station with optional tare memory. 6.3.1 Loading / Unloading: Storage Sequence for loading and unloading to a specified target value.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.3.3 Loading / Unloading: Select Key Select already chosen or new key. Return to previous menu. Back Select key. 6.3.4 Loading / Unloading: Weighing Entry of ID and start of weighing or termination of weighing.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Operating Mode 'Summing' In the operating mode 'Summing' the weighing terminal works as a totalizing scale with optional tare memory. 6.4.1 Totalizing Memory Operating sequence summing without preset target. Return to previous menu.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.4.3 Totalizing Memory: Select Key Select already chosen or new key. Return to previous menu. Back Select key. 6.4.4 Totalizing Memory: Weighing Entry of ID and start of weighing or termination of weighing.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.5.3 Recipe Weighing: Filling A Component Filling of a component. Return to main menu. Back Termination of the recipe in progress. Parts Confirm entries. Fill component and confirm.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Overview Data Entry The data entry menu contains the configuration settings, database entries and the backup of data. If the unit is switched on for the first time, first the master file data should be entered.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.6.2 Data Entry: Product File Data for up to 99 products with their product names can be stored in the product file against a 2-digit product- Show previous record in file. <...
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.6.3 Data Entry: Tare Memory Up to 50 tare weights with their pertaining designation can be stored in the tare file against a 2-digit tare-No. Select previous record in tare memory. <...
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.6.4 Data Entry: ID Memory Up to 99 IDs can be stored in the ID file against a 2-digit ID-No. Select previous entry in ID file. < Select next entry in ID file.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.6.5 Data Entry: Data Backup Weighing data and the contents of the database can be copied onto a USB device. In the other direction, the database can be restored. Return to main menu.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Data Entry: Settings Only trained service personnel may make / change configuration settings. Note: If no password is specified, password check is skipped. The password can be entered in the menu 'Data entries\Settings\General'.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.7.1 Data Entry / Settings / General Return to previous menu. Exit Confirm entries. Entry of unequivocal terminal-No. Terminal-No. Entry of date in format DD.MM.YY Date Time Entry of time in format HH.MM Entry of min.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Max.No of columns in Entry of the max. number of columns in the operating mode 'Load / unload'. load/unload Totalizing ID1 – ID4 Prompts for the entry of IDs in the operating mode 'Summing'.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.7.3 Data Entry / Settings / WLX Settings For a detailed description of the individual WLX parameters refer to technical manual 'WLX IAE'. Note: The WLX menu appears only when an WLX module is installed.
Operation Manual RAVAS Proline Touch Basic Rev. 6 6.7.5 Data Entry / Settings / Gravity Parameter Return to previous menu. Exit Confirm choice. With Gravity Determination Enable / disable gravity determination. Note: After enabling the function and confirming the parameters, the application is automatically restarted.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Data Transmission And Saving To File If data transmission is enabled in the menu 'Data Entry/Settings/General', after each weighing cycle data are transferred to the host system. When the 'AckNak' protocol is used, receipt of data must be confirmed by the host system with ACK(06H) within 3 sec.
Page 41
Operation Manual RAVAS Proline Touch Basic Rev. 6 Note: Data transmission and saving to file use the same structure of the data string. Field Max. length Format Terminal-No. numeric Date Format depending on configuration Time Format HH:MM Alibi-No. numeric (number of record in data archive)
Operation Manual RAVAS Proline Touch Basic Rev. 6 Printformats Weighing 12345678901234567890123456789012345678901234567890123456789012345678901234567890 Terminal-No. Date 08.01.15 Time 14:42 Consec-No. Gross 11.0 kg 10.0 kg Tare 1.0 kg 1000 Counting 12345678901234567890123456789012345678901234567890123456789012345678901234567890 Terminal-No. Date 08.01.15 Time 14:47 Consec-No. Ref.Weight Scale-No. Parts Gross 7.4 kg 6.4 kg...
Operation Manual RAVAS Proline Touch Basic Rev. 6 Summing mit Single- und Total weight 8.4.1 Singelweighing 12345678901234567890123456789012345678901234567890123456789012345678901234567890 10000 123456 Countername Consec-No. Gross 19.8 kg Tare 1.0 kg 18.8 kg Date 09.01.15 Time 08:32 8.4.2 Summing 12345678901234567890123456789012345678901234567890123456789012345678901234567890 Summing: Countername Tot. Gross Total 90.4 kg...
Operation Manual RAVAS Proline Touch Basic Rev. 6 Data Archive A record -secured with checksum- is stored for every completed weighing transaction in the internal data archive, consisting of weight, date and consecutive Id-No. The Id-No. is reset to 0001 with every change of the date.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Transport, Maintenance And Cleaning 10.1 Transport Notes: Transport and storage of electronic components such as boards, EPROMS, etc. must only be made in suitable anti-static ESD bags or cases. Storage temperature –25 to +70°C at 95% max. relative humidity without condensation.
Operation Manual RAVAS Proline Touch Basic Rev. 6 Trouble Shooting CAUTION This unit does not contain any customer serviceable parts! Only permit qualified personnel to service this equipment. Exercise care when making checks, tests, and adjustments! If any problem arises that has not been explained above, please follow this check list: ...
Operation Manual RAVAS Proline Touch Basic Rev. 6 11.1 Error Messages If an error occurs during calibration or normal operation, error messages are displayed as follows: Error Message Possible Cause Corrective Measure Jumper for protection of Set calibration jumper to...
Page 49
Operation Manual RAVAS Proline Touch Basic Rev. 6 Error Message Possible Cause Corrective Measure Scale in overload Unload scale -------- Overload CPU does not receive data Check internal and external from weighing interface wiring and cabling Powerup Out of Range ...
Need help?
Do you have a question about the ProLine Touch Basic and is the answer not in the manual?
Questions and answers