1. Manuals
  2. Brands
  3. NanoPulse Manuals
  4. Personal Care Products
  5. Bed Watcher
  6. User manual

NanoPulse Bed Watcher User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
© Copyright 2007-2016 NanoPulse, Inc. All rights reserved.
NanoPulse, Inc. reserves the right to make changes without further notice to any products herein to improve reliability,
function or design. NanoPulse, Inc. does not assume any liability arising out of the application or use of any product described
herein; neither does it convey any license under its patent rights nor the rights of others. NanoPulse products are not designed,
intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the NanoPulse product could create a
situation where personal injury or death may occur. Should Buyer purchase or use NanoPulse products for any such unintended
or unauthorized application, Buyer shall indemnify and hold NanoPulse, Inc. and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if
such claim alleges that NanoPulse, Inc. was negligent regarding the design or manufacture of the part.
Bed Watcher
User's Guide
Revision 1.2
30-Jun-2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bed Watcher and is the answer not in the manual?

Questions and answers

Summary of Contents for NanoPulse Bed Watcher

  • Page 1 NanoPulse product could create a situation where personal injury or death may occur.

  • Page 2: Table Of Contents

    Bed Watcher User’s Guide NanoPulse, Inc. Table of Contents Overview ...............................3 Features and Functions..........................3 Installation .............................4 Interfaces and Connectors ........................4 Operation ...............................5 5.1. Power Up ............................5 5.2. Turning the Device On and Off .......................5 5.3. Status LEDs .............................6 5.4. Reading Device Status........................6 Configuration Options...........................6...

  • Page 3: Overview

    Bed Watcher is a standalone security device which is dedicated for remote presence and motion detection and vital sign monitoring. Bed Watcher is designed for floor, shelf, wall or ceiling mounting with the help of the rack with rotating bracket and is capable detecting vital signs at up to 4 meters (13.1 feet) distance.

  • Page 4: Installation

    Figure 2 which is optionally supplied with the device. The rack can be fastened with 4 screws to the ceiling or wall. Then, the Bed Watcher may be inserted into or extracted from the bracket using the frame on its bottom.

  • Page 5: Operation

    READY LED blinks at that time. If DHCP server is not found the device assigns static IP address to itself. Default static IP address is 192.168.0.101. This address can be changed by the user with supplied Bed Watcher Test Utility. After the device has its own IP address READY LED becomes green and the device starts monitoring continuously.

  • Page 6: Status Leds

    5.4. Reading Device Status Bed Watcher device status can be read via ETHERNET RJ45 socket located on the bottom side of the device. When STA or AP network mode is enabled the device operates as a TCP/IP server and responds on requests from client applications according to the data exchange protocol described in a separate document.
  • Page 7 Bed Watcher User’s Guide NanoPulse, Inc. Prior using the utility you must connect it to a Bed Watcher device using Connect menu item from Device menu or corresponding toolbar button. Use Network port and specify IP address of the device. The device must either have received the IP address from DHCP server in your network or have assigned static IP address to itself.
  • Page 8 Bed Watcher User’s Guide NanoPulse, Inc. Reset Device - forces the device to be rebooted. This button does not help when the device is in UltraScope mode. Set Bootloader - forces the device to stop normal operation and enter in bootloader mode for updating the firmware.
  • Page 9 Bed Watcher User’s Guide NanoPulse, Inc. Get SSID - displays selected Wi-Fi network SSID. Applicable only to the devices with Wi-Fi option enabled. Get Security Type - displays selected Wi-Fi encryption mode, which is one of OPEN for no encryption, WEP, WPA or WPA2.

  • Page 10: Firmware Update

    For making the firmware update in the device the following sequence must be performed: 1) The device must be switched in the bootloader mode by pressing on the Set Bootloader button in the Bed Watcher Test Utility. 2) USB cable must be attached to the computer. READY (green) LED shall start blinking fast.

  • Page 11: Contact Information

     Make sure that your network is compliant with IEEE 802.3af PoE standard prior plugging-in the device. 9. Contact Information If you have questions about Bed Watcher operation, problem reports or suggestions for the device or documentation improvements please contact NanoPulse, Inc. representatives. NanoPulse, Inc.

Table of Contents