Orchestra multicolor led series 10" led panel (2 pages)
Summary of Contents for Luxli CNS-40B
Page 2
Thank you for choosing Luxli. The Luxli Constructor Large Block is part of our Constructor series—a fun, versatile modular system that allows you mix and match LED building blocks to shape and expand your lighting for any situation. Providing powerful and portable illumination, the Large Daylight Block features a 160-bulb bicolor LED panel, flicker-free dimmability, and compatibility with multiple battery types.
Specifications Light source 160 LEDs (80 × 5400 K and 80 × 3200 K) Power source Sony L-series or Sony M-series battery Panasonic D-28 battery (adapter plate included) 6 × AA batteries (adapter included) DC power Dimensions 5" × 1.5" × 3.5" (12.7 × 3.8 × 8.9 cm) Weight 7.4 oz (209 g)
Page 4
Precautions • Do not attempt to disassemble, repair, or perform any unauthorized modifications on this device. • Do not handle with wet hands, immerse in liquids, or expose to water and rain. Electric shock or fire may result. • This device contains small parts which may pose a choking hazard. Keep out of reach of children.
Page 5
• Batteries are prone to leakage when fully discharged. To avoid damaging this product, be sure to remove batteries when leaving the product unattended. • Do not stare or gaze at the LED panel for prolonged periods while the device is on. •...
Page 6
Overview Front Back: 1. Filter insertion slot 3. Power and dimming wheels 2. Quick-mount wing clips 4. Battery meter 5. DC power input 6. Battery mounting area 7. Threading mount...
Page 7
Detachable shoe mount 1. Cold shoe mounts 2. Locking rings 3. Locking Knob 4. 1/4"-20 threading mounts Also Included • Magenta, cool blue, and neutral diffusion filters • Pa n a s o n i c D 1 6 b a t te r y adapter •...
Powering the device Mounting batteries and adapter plates Place the battery or adapter plate in the mounting area, aligning the conductor contacts of the battery with the metal prongs of the light unit. Lock it into place by sliding it leftward until it clicks.
Page 9
Using AA batteries Insert 6 AA batteries into the NP-F 6×AA battery adapter. The positive and negative signs indicate the correct orientations. Close the battery hatch and mount the adapter onto the light unit.
Page 10
Mounting the shoe 1. Loosen the locking ring on the cold shoe mount without the 1/4"-20 threading mount and slide it into the slot at the bottom of the light unit. Tighten the locking ring firmly to secure the shoe in place. 2.
Page 11
Adjusting the light Dimming Rotate the power and dimming wheels until the desired effect is achieved. Turning up the left wheel will result in a cooler light, while turning up the right wheel will result in a warmer light. By adjusting the two dials, you can achieve any color temperature between 3200 and 5400 K.
Page 12
Connecting Constructor blocks 1. Arrange two blocks side by side, either vertically or horizontally. Both blocks must be facing the same direction in the same orientation.
Page 13
2. Fasten them together by sliding one light’s quick-mount wing clip into the wing clip of the other until the two units are flush and centered with each other. Additional units can be added as desired.
One-Year Limited Warranty This LUXLI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be...
Page 15
To obtain warranty coverage, contact the Luxli Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Luxli along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
Need help?
Do you have a question about the CNS-40B and is the answer not in the manual?
Questions and answers