Table of Contents
Advertisement
Operation
2. Allow the outlet hose
short tug (10cm at the beginning and 5cm at the end) again and allow the outlet
hose
7
return to lock
3. Pull out the outlet hose a short tug (10cm at the beginning and 5cm at the end)
to unlock.
The lock and unlock alternates on the whole length, you can repeat
above actions to engage lock and unlock function alternatively.
Adjusting water jet
1.
Use one hand to hold the jet holder
2. Use another hand
a. to turn the jet adjustment bar clockwise to reduce the water spray from line
to splash, to the end to stop the water spray.
b. to turn the jet adjustment bar counter-clockwise to enlarge the water spray
from splash to line, to the end to the maximum water spray.
Using wall-mounted hose box
The built-in automatic hose guide is preventing the hose from
overlapping while rolling up. Do not use hand to settle the hose coil.
There is a water stopper inside the outlet hose male coupling, help
change the nozzle with the tap water on.
1.
Turn the nozzle adjustment bar clockwise
to the end to stop the water spray.
2. Turn on the tap water.
3. Turn the hose box main body
working direction, hold the outlet hose
7
securely and pull the outlet hose out
to unwind to desired length.
4. Lock the outlet hose
nozzle adjustment bar counter-clockwise
to start the water spray. Always use one hand to hold the nozzle holder
watering.
5. Hold the outlet hose
it to adjust the hose length. It's recommended to turn the nozzle adjustment bar
clockwise to the end to stop the water spray before hose length adjustment.
6. After watering, turn the nozzle adjustment bar clockwise to the end to stop the
water spray, hold the outlet hose
16
7
return slowly to lock. If not, pull out the outlet hose a
8
.
1
to
7
and turn the
7
securely, unlock the outlet hose
7
securely to roll up slowly to the hose
9
7
to unwind or roll up
8
when
Hide quick links:
Advertisement
Table of Contents
