Advertisement
Thank you for your purchase of the Sanyo Vacuum Cleaner.
Please read these instructions carefully before using.
A FEW PRECAUTIONS
I. Operating without
the filter in place will allow dust to enter the motor
and
could damage
the vacuum
cleaner.
2.
Keep the vacuum
cleaner
away from stoves and other heat sources.
Heat can deform
and discolor
the plastic parts of the unit.
3. Keep the vacuum
cleaner
free of insecticides.
Do not wipe with benzine,
thinner,
petrol or other oils which
might cause discoloration
or cracking.
To clean the body and hose, dampen
a cloth with a mild detergent
and
wipe clean.
4. Blocking the suction
inlet or allowing
the dust to clog the hose will
decrease
the efficiency
of the motor.
5. Never try to vacuum
the following
objects.
They may damage
the unit or
cause a fire.
* Wet things,
mud, soil, and fluids
* Burning cigarettes
* Needles
and razor blades
* Inflammable
materials
such as gasoline
and thinner
6. The following
kinds of treatment
shorten
hose life:
* Bending
hose at an acute angle when
storing
* Pulling the hose with excessive
force
* Placing heavy objects on, or stepping
on the hose
7. Pull out the plug from the power
source after use. Grasp the plug – not
the cord –when
pulling
out the plug.
Pulling on the cord may lead to shortcircuiting.
8. Long and continuous
use causes the exhaust
air and the body of the
vacuum
cleaner to become
warm.
This, however,
does not denote
malfunction.
9. When vacuuming
places that are very dusty, and also when
vacuuming
regularly,
empty the dust compartment
before
it becomes
completely
filled.
Frequent
emptying
lengthens
the life of the motor and maintains
strong
suction power.
10. (For Special area only, Australia,
New Zealand
and Singapore)
If the supply cord of this appliance
is damaged,
it must only be replaced
by a repair shop appointed
by the manufacturer,
because
special purpose
tool are required.
Advertisement
