Fitting the thermal insulation
Front panels
2.
3.
3,9 x 9,5
6.
5.
4.
Fig. 17
Preparing for the control unit installation
Connections to the control unit back panel
Boiler control unit installation instructions
Note
Boiler water temperature sensor
control unit pack.
The Therm-Control temperature sensor (NTC 10 k
is supplied separately.
aJ
The boiler coding card and logo are supplied with the
product pack.
Push the measuring probes, boiler water temperature
sensor and Therm-Control temperature sensor
(NTC 10 k
) as far as they will go into the sensor
Ω
wells.
Power supply plug
is supplied with the control unit.
fÖ
(cont.)
1.
is supplied in the
§
)
Ω
2
3,9 x 9,5
!
Please note
Damaged capillary tubes will result in malfunc-
tions of the measuring probes.
Never kink the capillary tubes.
19