Related Manuals for Crosswater Elite
Summary of Contents for Crosswater Elite
- Page 1 Elite water This operation and care guide must be left with the user. control system Operation and care guide ELITEUSER DIGITAL WATER CONTROL AT YOUR FINGERTIPS DIGITAL WATER CONTROL AT YOUR FINGERTIPS...
-
Page 2: Important Safety Information
CONTROL AT YOUR FINGERTIPS Important Safety Information Please read these instructions carefully before Never operate any appliance with a damaged using this system and keep in a safe place for cable or plug. Do not use an appliance that future reference. has been dropped or damaged or after any malfunctions. -
Page 3: Table Of Contents
DIGITAL WATER CONTROL AT YOUR FINGERTIPS Contents Key to the display icons Extra features Operating the Elite water control system Changing display from flow to temperature Setting the temperature Water consumption Setting the water flow Return Using the menu Setting maximum inlet temperature... -
Page 4: Key To The Display Icons
CONTROL AT YOUR FINGERTIPS Key to the display icons Open / close bath drain Shows the total amount valve (Bath filler waste only and last usage of water available on bath processor) consumption Cleaning mode: disables the Thermal disinfection control for 45 seconds (emergency stop by pressing control) Water will flow at maximum temperature for... -
Page 5: Operating The Elite Water Control System
DIGITAL WATER CONTROL AT YOUR FINGERTIPS Operating the Elite water control system To turn ON To turn OFF Press the control wheel once, Press the control wheel once, the control illuminates Orange the water and lights will turn off. and water will start to flow through ‘default’... -
Page 6: Setting The Water Flow
CONTROL AT YOUR FINGERTIPS Setting the water flow At the same time, press and turn the control wheel clockwise to increase the flow and anti-clockwise to decrease the flow. Using the menu (Note: The bath control is used below for demo purposes) Turn on the control. -
Page 7: Diverting The Water Flow
DIGITAL WATER CONTROL AT YOUR FINGERTIPS Diverting the water flow Turn on the control. Press the menu button, the icons will appear with the ‘un-selected’ outlet icon highlighted. Press the menu button to select, the outlet will be diverted, the temperature will be displayed and the outlet icon will appear briefly. -
Page 8: Setting The Memory (Shower Processor Only)
CONTROL AT YOUR FINGERTIPS Setting the memory (shower processor only) Up to three memory settings Press the menu button, can be stored. scroll to the ‘save’ icon. Note: Only the ‘default outlet’ Press the control wheel temperature can be set to once and the shower memory. -
Page 9: Bath Filling Memory Option (Bath Processor Only)
DIGITAL WATER CONTROL AT YOUR FINGERTIPS Bath filling memory option (bath processor only) Up to three memory settings Press the menu button, can be stored. scroll to the ‘save’ icon. Note: To fill the bath from one Press the control wheel of the memory settings the once and bath temperature bath must be connected to the... -
Page 10: Cleaning (Safe) Mode
CONTROL AT YOUR FINGERTIPS Cleaning (safe) mode Press the menu button and To stop, press the menu button, enter the extended menu. scroll to the power icon and press the menu button. Select the ‘cleaning mode’ icon by pressing the menu button. -
Page 11: Self Check Mode
DIGITAL WATER CONTROL AT YOUR FINGERTIPS Self check mode Green lights up - the valves go off. Blue lights up - the valve goes cold. Press the menu button and enter the extended menu. The valves are closed. Scroll to the ‘self check’ icon and press the menu button, the Once the check is complete system will then run through a... -
Page 12: Extra Features
CONTROL AT YOUR FINGERTIPS Extra features Changing display from temperature to flow Turn on the control. The display switches automatically back to Press the menu button, scroll temperature after 10 seconds. to the ‘flow / temperature’ icon and press the menu button, the ‘flow’... -
Page 13: Setting Maximum Inlet Temperature
DIGITAL WATER CONTROL AT YOUR FINGERTIPS Setting maximum outlet temperature When in the extended menu, Use the control wheel to scroll to the ‘maximum set the required maximum inlet temperature’ icon and temperature, press the menu press the menu button, the button and the icon will display ‘maximum outlet temperature’... -
Page 14: Statistics
CONTROL AT YOUR FINGERTIPS Statistics When in the extended menu, - Total operation time in std. scroll to the ‘statistics’ icon and - Number of times Quick Access 1 used x. press the menu button. The display will then scroll - Number of times Quick Access 2 used x. - Page 15 DIGITAL WATER CONTROL AT YOUR FINGERTIPS...
-
Page 16: Cleaning / Maintenance
Please do not open the processor unit as this will invalidate your guarantee. Servicing / contact info In the unlikely event that you are experiencing difficulties with your new Crosswater Digital product, please contact the Crosswater Technical Advice team on: 0845 8738843 or via e-mail –...
Need help?
Do you have a question about the Elite and is the answer not in the manual?
Questions and answers