Philips SPC640NC/00 User Manual page 18

right of your screen) to open the Philips
CamSuite control panel.
3
Click the button to open the
[Properties] page.
»
The [General] settings screen appears.
4
Click the [Video] tab.
»
The [Video] setting screen appears.
5
Check whether [Full automatic control]
is enabled (box checked). If it is enabled,
uncheck the box to disable [Full
automatic control].
6
Set [Frame rate] to a minimum of 5 fps.
7
Click [Ok] to save your settings.
Note
The maximum frame rate (frames per second
(fps) produced by the webcam) and the
maximum image resolution depend on the
webcam software will automatically adjust
frame rate and resolution as good as possible
for your particular situation. It might be
notebook do not meet the requirements for
maximum frame rate and resolution setting.
No image is available on the screen. What
should I do?
1
Ensure that the webcam is connected
properly.
2
Check whether you are using the
webcam in another application.
3
You cannot use the webcam in more than
one application at the same time. Close
the application.
How can I restore my Philips webcam to the
default factory settings?
1
Double click on the Philips CamSuite
icon in the Windows taskbar (bottom
right of your screen) to open the Philips
CamSuite control panel.
2
Click the button to open the
property pages.
»
The [General] settings screen appears.
3
Click the [Video] tab.
»
The [Video] setting screen appears.
4
Click the [Reset] button.
»
All webcam settings are now reset
back to the default factory settings.
5
Click [Ok] to save your settings.
EN 17