Installation
5.0
Installation
Before installation
.
5 1 Securely Anchored
,
First should ensure the installation location is stable and safe The
size of the micro inverter as the picture 5 1 1,and then the user should mark the
mounting holes position on the wall according to the size of the micro
.
inverter Installation location should ensure stable and easy to observe the LED
.
lamp Last,the bottom and top of micro inverter should have enough space for
heat dissipation and maintenance Please see figure 5 1 4
(5-1-1)
a.
Installed in a dry and ventilated place
b.
Install where easy to maintain
,
consumption then enhancing power generation efficiency.
,
please read the installation instructions carefully
▼
The temperature will rise by the working
so don't put inverter with Flammable and explosive goods
▼
stored in.
▼
Don't install the Inverter iin where have explosive dangerous.
- -
-
.
Sketch Map
190mm
,
and reduce the length of the cable to reduce
Warning
,
- -
110mm
260mm
.
8