Philips CT7568/000APMEA User Manual page 39

Philips xenium ct7568 9@9t
Table of Contents

Advertisement

E­mail server
To configure the settings needed to connect to your e-
mail service.
Password
The password to access your e-mail
account.
E-mail
Your e-mail address.
address
SMTP
The Simple Mail Transport Protocol
address
(SMTP) address. This is the server for
your outgoing mail and is usually in a
format like smtp.yourmail.com.
POP3
The Post Office Protocol (POP)
address
address. This is the server for your
incoming mail and is usually in a format
like pop.yourmail.com.
Login
The login (or user name) to access your
e-mail account.
You must obtain the POP3 and SMTP addresses from
your e-mail service provider.
If you wish to use a GPRS connection to access your e-
mail, you may need to use the SMTP server of your
mobile service provider to send e-mails.
38
Advanced
POP3 port
The port number on the POP3
server. This is usually port 110.
SMTP port
The port number on the SMTP
server. This is usually port 25.
DNS
The IP address of your Domain
address
Name Server.
SMTP
SMTP authentication is usually set to
authent.
Off. Contact your provider for more
information.
Network access
Before you can consult your e-mails, you first need to
configure your connection to the internet.
GSM Settings
When you use a GSM connection to connect to the
internet, your mobile phone dials a number provided
by your network operator and the data is sent and
received over this connection, somewhat like a dial-up
internet connection from a PC. The GSM connection
parameters are described in the table below.
Messages

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ct7568/bbcca8cnXenium 9@9t

Table of Contents