Getting Started; Inserting The Sim Card And Memory Card - Philips CT0699SLV/40 User Manual

Gsm/gprs dualband digital mobile phone
Hide thumbs Also See for CT0699SLV/40:
Table of Contents

Advertisement

1.Getting Started

Please read the safety instructions in the
"Precautions" section before use.
Before you start using your phone, you must insert
a valid SIM card supplied by your GSM operator
or retailer. The SIM card contains your subscription
information, your mobile phone number, and a
small quantity of memory in which you can store
phone numbers and messages. The SIM card can
be removed from your mobile phone and inserted
into any other GSM/GPRS mobile phone to be
read (a new mobile phone will automatically read
the SIM card).
To prevent losing or damaging the data stored on
the SIM card, you should avoid touching the
metallic area on the card and keep the SIM card
away from electricity or magnets. If the SIM card
is damaged, you will not be able to access the GSM/
GPRS network and use the mobile telephone.
Getting Started
P699_EN
Before removing the SIM card you must switch
off the mobile phone. Do not insert or remove
the SIM card while the phone is connected to an
external power source, as this could damage the
SIM card.

Inserting the SIM card and Memory card

Remove the back cover and battery
Make sure that the phone is powered off. You need
to remove the back cover and battery of your phone
before you can insert the SIM card. Use your finger
to lift the battery up from its slot.
8
8/23/07, 5:17 PM
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ct0699blk/40Ct0699blkCt0699slv699 dual sim699

Table of Contents