Levven Soul Play Quick Start Manual

Soul Play

Quick Start Guide

Play from mobile devices

Connect a mobile device to hear its sound from the speakers
connected to Soul Play.
1. Click the Gear button
Press the power/mode button to turn
on Soul Play. The button will illuminate yellow. Click the
power/mode button until the "Bluetooth Receive" button
illuminates or blinks blue. Press and hold the Bluetooth
Receive button until its light begins blinking blue. A blinking
Bluetooth Receive button indicates Soul Play is ready to
pair a mobile device.

2. Pair a device to Soul Play

Open the Bluetooth settings on your
mobile device. Select Levven Soul Play from the list of
devices to pair your device to the Soul Play. The Soul Play's
Bluetooth button will turn to solid blue.
Open and play from any media app on your device to hear
the sound through the speakers connected to Soul Play.

3. Switch between mobile devices

To play from a different device, follow steps 1 and 2 to pair
the device the first time.
To switch between devices that have been paired, press
and hold the Bluetooth Receive button until its LED blinks
blue. Open the Bluetooth settings on the device and select
Levven Soul Play.

Relay sound between components

Soul Play has four modes of operation: Bluetooth, Bluetooth
Relay, SKAA Receive, and SKAA Relay. Pressing the power/mode
button will cycle through to each mode.
Soul Play's Relay LED will illuminate white to indicate that it is
in relay mode; sending the audio signal out for other Levven
Audio or SKAA-compatible product(s) to receive and play.
Click the power/mode button on the receiving product to put
it in "SKAA Receive" mode. Its "SKAA Receive" button LED will
illuminate and it will play the sound being relayed to it from Soul
Play. Learn more about SKAA pairing options and instructions at
levven.com/support.

Soul Play controls

The buttons on the Soul Play give you instant control over
your sound.
Relay LED

TV Transmitter setup (optional)

1. Plug the TV Transmitter's USB power cable into a USB port on the
TV or power bar. The TV Transmitter LED will illuminate red.
2. Point the TV or set-top box infrared remote control at the TV
Transmitter's infrared receiver.
3. Press these buttons on the remote control once each in the
following sequence: a) volume up, b) volume down, and c) mute.
The LED on the TV Transmitter will blink once during each button
press.
4. Connect the 3.5mm end of the included optical cable into the end
of the TV Transmitter, and connect the other end of the optical
cable into the optical or S/PDIF output on the TV.
5. Set the TV audio output to "PSM" or "External Speakers" in the TV
audio settings menu.
6. Turn your TV up to normal listening levels.
LED indicator
Connect to After completing the one-time remote setup,
USB power connect optical cable from TV audio output
3
In Step 3 of the setup, press the
buttons on your remote control
in the following sequence:
Volume up
Volume down
Mute
1
2
Wireless audio from more sources
Your Soul Play all-in-one wireless receiver and amplifier will receive
wireless audio via Bluetooth from mobile devices, Alexa and Google
Home, and via SKAA from TVs and other Soul products.
SKAA
receive
Bluetooth
receive
Power/mode
Increase
volume
Decrease
volume

Play from a TV

Connect your optional TV Transmitter to one or more Soul
products.
TV
1. Click the Soul Play's power/mode button to switch Soul Play
to "SKAA Receive" mode. The top button LED on Soul Play
will illuminate.
2. Click the SKAA button on Soul Play two times quickly. The
button's LED will turn yellow and your TV sound will start
to play from the speakers connected to Soul Play.
3. Adjust the volume on Soul Play using the volume up and
down buttons, or using the TV remote.
4. Press and hold the SKAA button for four seconds until the
button's LED turns green.
Learn more about SKAA pairing options and instructions at
levven.com/support.
Learn more about Soul Play, Soul Bar,
and Soul Sub
Discover all the features the Soul family of products
offers at levven.com/support