Philips DECT5252B/05 User Manual page 37

To remotely control your answer machine
To remotely access your answer machine :
- from another phone dial home
- if your answer machine is on, during or after the message press the star
if your answer machine is off, you will hear a beep after 39 seconds, then press the star
- dial your remote control code (the default code is the registration code RC)
- if you have new messages they will be automatically played.
The following table indicates the features available when remotely accessing the answer machine.
Record memo
Play previous message
Play message
Play next message
Listen again
To change the remote control code
The default code is the registration code (written under your base station).We advise you to
personalize it.
Press to enter the carousel menu
Scroll to Answer machine and press
Scroll to Answphone settings and press
Scroll to Remote control and press
Scroll to Change code and press
Delete the default code, enter your new remote control code and press
36
http://www.philips.com/faqs/dect
dial
0 Delete
dial
Activate answer machine
1
dial
Stop
2
dial
3
Deactivate
dial
5
Answer machine
to select
to select
to select
to select
key on the handset ;
key
dial
6
dial
7
dial
8
dial
9