Page 2
EL wire, the EL wire power inverter with extension cable, a 3.5mm trigger cable and a speaker. An optional xenon flash unit and trigger cable are also available. Below is a diagram detailing the connection points on the Thunderstorm controller. 1 Event Button...
There are four main components, and one optional, to be installed in the space you plan on using the complete Thunderstorm system. These are the EL Wire, the LED strobe light, the flash unit (optional), a speaker and the controller itself.
Page 4
Audio Line Out The line level output of the Thunderstorm can be used in in conjunction with or in place of the speaker output. A powered subwoofer or powered speaker system can easily be connected to the line out. We have found a truly impressive experience can be achieved using a 2.1 channel (left, right &...
Page 5
General Connection Diagram October 2015 - 5 -...
Page 6
A service fee may be assessed if it is determined that the failure was not due to any Phoenix supplied components. Phoenix Sound Systems, Inc. cannot be liable for damage to the system during shipping to our facilities due to mishandling, inadequate packaging or similar circumstances beyond our control.
Need help?
Do you have a question about the Thunderstorm and is the answer not in the manual?
Questions and answers