Williams-Sonoma Truman Round Bar Cart Assembly Instructions

Pre-Assembly

1. Please read all instructions carefully and completely before assembly.
2. Assembly by two people is recommended.
Parts included: (Not to scale)
Part Qty. Description
A 1 pc
Top frame
B 2 pcs Frame w/lip inside
C 1 pc Frame w/o lip inside
D 2 pcs
Pole leg
E 2 pcs Pole leg
F 2 pcs Glass shelf
C. Frame w/o lip inside
Hardware/Tools included: (Not to scale)
Part Qty. Description
G 16 pcs Flat head Allen screw
H 1 pc
Allen wrench

Step 1.

Carefully open the packaging and clear packaging material from assembly area.
Place all components on a protective surface.

Step 2.

Attach the bottom frame w/lip inside (B) to four pole legs (D), (E), align the holes and insert flat head Allen screws (G) into the
four holes, do not tighten until all four frames are fully assembled. Repeat the same procedures for the rest three frames (C), (B)
& (A). (Fig. 1)
Please note:
a. Pole legs (D) should be at the either end of top frame (A);
b. Tighten ALL of the flat head Allen screws (G) with Allen wrench (H) until TIGHT.
Truman Round Bar Cart
Assembly Instructions
(caster w/brake)
(Caster w/o brake)
D. Pole leg
(caster w/brake)
G. Flat head Allen screw
A. Top frame
E. Pole leg
(caster w/o brake)
H. Allen wrench
1 / 2
B. Frame w/lip inside
F. Glass shelf