Call Waiting; Caller Line Identification - Philips CD5301S/73 User Manual

EN
Three-party conference call
The conference call feature allows one external call to be shared with two handsets (in intercom). The three
parties can share the conversation and no network subscription is required.
c
1. Press
2. Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 regis-
tered handsets, the handset numbers which are available for establishing a conference call will be
displayed. Press
2
e.g. press
The called handset rings.
r
3. Press
4. Press CONF
TIP If Conference
established if the second handset takes the line when there is already an external call in progress.

Call waiting

If you have subscribed to Call Waiting service, the earpiece will emit a beep tone to inform you that there is a
second incoming call. The number or name of the second caller will also be displayed if you have subscribed to
Caller Line Identification service (CLI). Please contact your network provider for more information on this
service.
To answer the second call, press

Caller Line Identification

Caller Line Identification (CLI) is a special service that you may subscribe from your network operator. If you
have subscribed to CLI service, and provided the identity of the caller is not withheld, the number or name of
the caller (if stored in the phonebook) will be displayed when the phone rings so that you may decide whether
to answer the call or not. Please contact your network provider for more information on this service.
20
to put the external call on hold (the caller can no longer hear you).
m
ALL to call all the handsets or press the handset number to select a specific handset,
to call handset 2.
key on the called handset to answer the internal call, where both internal callers can talk.
soft key on the first handset to start the three-party conference.
mode is activated (see page 45), a three-party conference call is automatically
r
+
Call
2
(may be different according to your network).