Download Print this page

GE JXHC1 Installation Instructions

Range hood power cord kit
Hide thumbs

Advertisement

Quick Links

Installation
Instructions
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com.
WARNING
Use in unapproved appliance may
result in risk of fire or electric shock. This range
hood cord connection kit should be used only
with GE Appliances series range hood models
AV447, JN327, JV338, JV247, JV248, JV347,
JV348, JV367, JV566, JV565, JV535, JV536, JV635,
JV636, JV665, JV666, JVE40 JVX3240, JVX3300,
JVX5300, JVX5360, JVX5305, JVX5365, PVX7300,
PVX7360, RN328, UVC7, UVC9, UVW8 and UVW9.
BEFORE YOU BEGIN
Read these instructions carefully and completely.
IMPORTANT
for local inspector's use.
IMPORTANT
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Skill Level – Installation of this power cord kit
requires basic mechanical skills. Proper installation
is the responsibility of the installer. Product failure
due to improper installation in not covered under
the GE Appliances Warranty.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
an electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for
the electric current. This appliance is equipped with
a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is
properly installed and grounded.
READ AND SAVE THESE INSTRUCTIONS
Range Hood
Power Cord Kit
JXHC1
— Save these instructions
— Observe all governing
WARNING
Improper grounding can result
in a risk of electric shock. The appliance must be
grounded. The plug must be plugged into an outlet
that is properly installed and grounded. Consult a
qualified electrician if the grounding instructions are
not completely understood, or if doubt exists as to
whether the appliance is properly grounded. Do not
use an extension cord. If the power supply cord is
too short, have a qualified electrician install an outlet
near the appliance.
TOOLS NEEDED
Flat blade and
Phillips head screwdrivers
PARTS INCLUDED
PART
Power Cord with Strain Relief
Wire Nuts
Installation Instructions
Wire cutters/
1/4" Nutdriver
strippers
QUANTITY
1
3
1
49-80087-10 09-18 GEA

Advertisement

loading

  Related Manuals for GE JXHC1

  Summary of Contents for GE JXHC1

  • Page 1 Range Hood Installation Power Cord Kit Instructions JXHC1 If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737) or visit our website at: GEAppliances.com. WARNING WARNING Use in unapproved appliance may Improper grounding can result result in risk of fire or electric shock. This range in a risk of electric shock.
  • Page 2 Installation Instructions REMOVE CONNECTION BOX CONNECT THE CORD WIRES COVER Inspect the junction box wires to determine the type of connections that should be made. Locate the hood connection box and remove its cover. For hoods with a ground screw: A Connect the green ground wire to the green ground screw.