£ 3
Bi-Level ventilation - Heating
This setting is used if the inside of the windshield begins
to fog up, ice up or when wet snow is falling. As soon as
the windshield has cleared, reset to g or g | .
In the heating mode, warm air is supplied to the wind
shield, foot area, air outlets (8) and (9), and to the ducts
in the front doors. Additionally, air may be emitted per
iodically from outlets (7), depending on the interior tem
perature.
In the cooling mode, cool air is supplied to the wind
shield, foot area, front door ducts, and air outlets (7), (8)
and (9).
Note:
In warm, humid climates, prolonged use of this setting
may create condensation on the outside of the wind
shield, directly above the defroster ducts.
I
23