IFC-400 l User’s Manual Preface Prefaces Revision Revision Description Date Manual Released 2019/09/19 Disclaimer All specifications and information in this User’s Manual are believed to be accurate and up to date. Rusavtomatika does not guarantee that the contents herein are complete, true, accurate or non- misleading.
IFC-400 l User’s Manual Preface Safety Precautions Before installing and using the equipment, please read the following precautions: Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage. The power outlet shall be installed near the equipment and shall be easily accessible.
IFC-400 l User’s Manual Preface Technical Support and Assistance 1. Visit the Rusavtomatika website at www.rusavtomatika.com where you can find the latest information about the product. 2. Contact your distributor, our technical support team or sales representative for technical support if you need additional assistance.
Chapter 1: Product Introductions 1.1 Overview The IFC-400 series Panel PC is based on 7th Gen. Intel® Core™ i5-7300U (up to 3.5GHz) / i3-7100U (2.4GHz) Dual Core processor. Designed with flat surface, IP 65 dust / waterproof front panel, and aluminum die-casting front frame with rugged body structure, it is a versatile I/O connections, and rugged reliability industrial panel PC.
IFC-400 l User’s Manual Chapter 1: Product Introductions 1.3 System I/O 1.3.1 Front Removable HDD Bay SIM Card Socket Used to inserts a 2.5” HDD device Used to insert SIM card Antenna hole CFast Socket Used to connect an antenna for optional Mini-...
IFC-400 l User’s Manual Chapter 1: Product Introductions 1.3.3 Side (Right) COM port AT/ATX mode select switch COM3~4 support RS232/422/485 serial device Used to select AT or ATX power mode PC/CAR mode select switch Universal I/O Bracket Used to select PC or CAR power mode...
Chapter 2: Switches and Connectors 2.2 Connector/ Switch Definition List of Connector/ Switch Connector Location Definition AT_ATX2 AT/ ATX Power Mode Switch CLR_CMOSl Clear BIOS Switch CAR_PWR2 PC/ Car Mode Switch DELAY_TIME2 Car mode PC turn off delay time CFAST1_2 CFast Socket PWR_SW3 Power Switch...
IFC-400 l User’s Manual Chapter 2: Switches and Connectors 2.3 Switches Definitions AT_ATX1: AT / ATX Power Mode Switch Switch Definition 1-2 (Right) ATX Power Mode(Default) 2-3 (Left) AT Power Mode CLR_CMOS1: Clear BIOS Switch Switch Definition Normal Status (Default)
Page 27
Chapter 2: Switches and Connectors Step of Setting Power Ignition Step 1: To select power ignition by PC/CAR switch. Step 2: To configure the power off delay time, please check the Delay Time Setting Options in advance. Step 3: To connect the power and ignition power Step 1 Step 3 Pin 1-2 (Right): PC Mode...
Page 33
IFC-400 l User’s Manual Chapter 2: Switches and Connectors PWR_SW1 : Remote Power Switch Connector Type: Terminal Block 1X2 2-pin, 3.5mm pitch Definition Power Button...
Page 34
IFC-400 l User’s Manual Chapter 2: Switches and Connectors LAN1, LAN2: RJ45 with LEDs Port Connector Type: RJ45 Connector Definition Definition LAN_MDI0P LAN_MDI2N LAN_MDI0N LAN_MDI1N LAN_MDI1P LAN_MDI3P LAN_MDI2P LAN_MDI3N Act LED Status Definition Blinking Yellow Data Activity No Activity Link LED Status...
Page 36
IFC-400 l User’s Manual Chapter 2: Switches and Connectors PWR_LED2: Power LED Status Definition POWER LED+ POWER LED- HDD_LED2: HDD Access LED Status Definition HDD LED+ HDD LED-...
Chapter 3: Front Panel Controls 3.1 Users Controls POWER MENU INCREASE DECREASE AUTO ■ Power Button Turns the monitor on or off. -r: k ■ 1. Blue indicates power on. 2. Yellow indicates HOD access status. ■ MENU / Enter Button Press to view the OSD menu.
IFC-400 l User’s Manual Chapter 3: Front Panel Controls 3.2 OSD Operation 3.2.1 Luminance ■ Brightness Adjust the luminance level of the screen. ■ Contrast Adjusts the contrast level of the screen. ■ Gamma This item allows you to on or off the Gamma function.
IFC-400 l User’s Manual Chapter 3: Front Panel Controls 3.2.2 Picture ■ Phase Adjust the monitor internal signal phase. ■ Clock Adjust the monitor internal sampling clock rate. ■ H. Position Adjusts the position of the screen image left and right.
IFC-400 l User’s Manual Chapter 3: Front Panel Controls 3.2.5 Setup ■ Language Selects the language in which the OSD menu is displayed. The factory default is English. ■ Mute Allows the user to turn the Mute On or Off.
Chapter 4: System Setup 4.1 Set torque force to 3.5 kgf-cm to execute all the screwing and unscrewing. 4.2 Removing PC module from the display module. In order to prevent electric shock or system damage, before removing the chassis cover, must turn off power and disconnect the unit from power source. 1.
Chapter 3: System Setup 4.3 Installing SODIMM 1. Remove SODIMM cover in the below circled area for installing memory module. 2. Insert memory module from 45 degree direction. Make 3. Press the memory module vertically downward until you hear the "click" sound. sure the memory module is firmly in place.
Chapter 3: System Setup 4.4 Installing mini PCle card / mSATA 1. Two mini PCle slots are available for IFC-400 series. MiniPCIEl supports mSATA. 2. Insert mini PCle card or mSATA module from 45 degree direction. 3. Press the mini PCle card or mSATA module down and lock it with two screws (M2x3.7L).
Chapter 3: System Setup 4.5 Installing HDD on removable STAT HDD bay 1. One removable SATA HOD bays is available for PC400 Series 2. Unscrew the two sun screws circled below to take out the removable SATA HOD bay.
Page 47
Chapter 3: System Setup 3. Lock the 2.5" HOD with HOD bracket using four screws (M3x4L). 4. Slide the HOD bracket back and then fasten the sun screws.
Chapter 3: System Setup 4.6 Installing CFast card 1. One CFast socket is available for PCl00 series. Unscrew two screws to remove the bracket. 2. Insert CFast card into the socket until you hear the "click" sound. 3. The socket is push-push type. Push the installed CFast card again to remove it.
Chapter 3: System Setup 4.7 Installing SIM card 1. For IFC-400 Series, two SIM card slots are available on system chassis between removable HDD bay and CFast slot. 2. Press the SIM card in until you hear the "click" sound.
Page 50
Chapter 3: System Setup 3. Please note that the installation of SIM 1 and SIM 2 has to match the installation of mini PCle slots. SIM Card Socket Number Matching Mini PCle Slot SIM 1 MiniPCIEl / mSATA SIM 2 MiniPCIE2 4.
Chapter 3: System Setup 4.9 Installing antenna 1. Three antenna holes are available for PC400 series. 2. Remove antenna hole cover on the system panel. 3. Have antenna jack penetrate through the hole.
Page 53
Chapter 3: System Setup 4. Put on washer and fasten the nut with antenna jack. � � � ·. ·•. ·-./· � -� . ' - ·Z • £,1 • •I ''"; � c ,- • 5. Attach the RF connector at the cable-end onto the communication module. 6.
Chapter 3: System Setup 4.10 Assembling chassis top cover 1. Ensure thermal pad is in place on the CPU thermal block. 2. Close the chassis top cover following the below direction and make sure the aluminum part on the top cover is touching the thermal pad on CPU thermal block.
Page 55
Chapter 4: System Setup 3. Fasten the 6 screws (M3x5L) to lock the system body with top cover.
Chapter 3: System Setup 4.11 Connecting PC module with VIO display module 1. Hold the PC module with its connector facing towards the connector on the back of VIO display module. 2. Press the PC module downward to ensure two modules are firmly connected. 3.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.1 BIOS Introduction The system BIOS software is stored on EEPROM. The BIOS provides an interface to modify the configuration. When the battery is removed, all the parameters will be reset. BIOS Setup Power on the embedded system and by pressing <Del>...
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.2 Main Setup Press <Del> to enter BIOS CMOS Setup Utility. The Main setup screen is showed as following when the setup utility is entered. System Date/Time is set up in the Main Menu.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.3.1 CPU Configuration ■ Intel Virtualization Technology Virtualization enhanced by Intel Virtualization Technology will allow a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple Virtual systems.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.3.2 PCH-FW Configuration 5.3.3 SATA and RST Configuration ■ SATA Controller(s) Enable or disable Serial ATA controller. ■ SATA Mode Selection This item allows users to select mode of SATA controller. ■ Serial ATA Port 0 / 1 / 2...
Chapter 4: BIOS Setup 5.3.4 RST (UEFI RAID) Configuration How to set the UEFI RAID: 1. When set to RAID, please save change reset system. Hptio �,etup Ut1l1t1J - Cop1jr1ght IC) 21113 An, e r1can Megatrends, Inc. SATA And RST Configuration Determines how SATA controller(s) operate.
Page 64
IFC-400 l User’s Manual Chapter 4: BIOS Setup 3. Into Intel(R) Rapid Storage Technology, and start create RAID volume. 4. Start Create the RAID ■ Select Disk that you want to do the RAID ■ Select [x]; No-Select [ ]...
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.3.7 Super IO Configuration This setting allows you to select options for the Super IO Configuration, and change the value of the selected option. ■ Serial Port 1 Configuration Serial Port This item allows you to enable or disable serial port.
Page 67
IFC-400 l User’s Manual Chapter 4: BIOS Setup ■ Serial Port 2 Configuration Serial Port This item allows you to enable or disable serial port. Change Settings This item allows you to change the address & IRQ settings of the specified serial port.
Page 68
IFC-400 l User’s Manual Chapter 4: BIOS Setup ■ Serial Port 4 Configuration Serial Port This item allows you to enable or disable serial port. Change Settings This item allows you to change the address & IRQ settings of the specified serial port.
IFC-400 l User’s Manual Chapter 4: BIOS Setup ■ Serial Port 6 Configuration Serial Port This item allows you to enable or disable serial port. Change Settings This item allows you to change the address & IRQ settings of the specified serial port.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.3.9 Serial Port Console Redirection ■ Console Redirection These items allows you to enable or disable COM1 console redirection. 5.3.10 Stack Configuration...
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.3.11 CSM Configuration ■ CSM Support This item allows users to enable or disable for “CSM Support”. ■ GateA20 Active This item allows users to set Upon Request or Always for "GateA20 Active“.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.3.12 USB Configuration ■ Legacy USB Support Allows USB keyboard/ mouse to be used in MS-DOS. ■ XHCI Hand-off Determines whether to enable XHCI (USB3.0) Hand-off feature for an operating system without XHCI (USB3.0) Hand-off support.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.4 Chipset This section allows you to configure and improve your system and allows you to set up some system features according to your preference. 5.4.1 System Agent (SA) Configuration ■ VT-d...
Page 74
IFC-400 l User’s Manual Chapter 4: BIOS Setup ■ Graphic Configuration GTT Size This item allows you to change the GTT size. Aperture Size Aperture size optimal between 128MB, 256MB, 512MB, 1024MB or 2048MB. DVMT Pre-Allocated DVMT pre-allocated (fixed) Graphics memory size optimal from 0M to 60M.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.4.2 PCH-IO Configuration This section allows you to configure the chipset. ■ PCI Express Configuration...
Page 76
IFC-400 l User’s Manual Chapter 4: BIOS Setup PCI Express Root Port 6 / 10 / 11 PCI Express Port 6 / 10 / 11 This item allows you to enable or disable PCI Express Port 6 / 10 / 11 in the chipset.
Page 77
IFC-400 l User’s Manual Chapter 4: BIOS Setup ■ HD Audio Configuration HD Audio Control detection of the HD-Audio device. This item allows you to select <Enabled>, <Disabled> or <Auto>. Disabled: Azalia will be unconditionally be disabled. Enabled: Azalia will be unconditionally be enabled.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.5 Security Security menu allow users to change administrator password and user password settings. ■ Administrator Password This item allows you to set Administrator Password. ■ User Password This item allows you to set User Password.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.6 Boot This menu allows you to setup the system boot options. ■ Setup Prompt Timeout This item sets number of seconds to wait for setup activation key. ■ Bootup NumLock State This item selects the keyboard NumLock state.
IFC-400 l User’s Manual Chapter 4: BIOS Setup 5.7 Save & Exit This setting allows users to configure the boot settings. ■ Save Changes and Reset This item allows user to reset the system after saving the changes. This item allows user to reset the system after saving the changes.
Appendix WOT & GPIO WDT Sample Code // 10 Address 0xA16 is time value // 10 Address 0xA15 is WDT enable and configuration Example, Set 0xA16=-0x03, 0xA15=0x31, it will reset after 3 seconds #define TimePort 0xA16 #define TimeEnablePort 0xA15 WriteByte (TimePort,0x03} WriteByte (TimeEnablePort,0x31J Watchdog Timer Configuration Register 1 - base address + OSh Name...
Page 84
IFC-400 l User’s Manual Appendix – WDT & GPIO Sample Code: #1 : // Get GPI 1 status //Get GPI 0 Pin Status Register printf("Input port value = %x\n", ReadByte(GPI1to4_ADDR)); // bit4 = GPI 1 status // Get GPI 5 status //Get GPI 0 Pin Status Register printf("Input port value = %x\n", ReadByte(GPI_REG5to8));...