Zamel Exta SEM-01 Instruction Manual

INPUT SEPARATOR SEM-01
DESCRIPTION
Input separator is used to separate
control signals into particular system
groups, simultaneously blocking the-
ir access to other groups. The input
separator SEM-01 is used for building
control systems which use exta series
home automation devices. This sys-
tem allows to subordinate the influen-
ce of control signals which are led to
releasing inputs. The separator lets
the signal pass one side but blocks the
signal to pass the opposite side. There
are 4 independent separators in one
casing and they can be used in a new
control system.
FEATURES
‫ ی‬Control signals separation,
‫ ی‬used in new control systems,
‫ ی‬four independent separators,
‫ ی‬monomodular casing,
‫ ی‬TH 35 rail mounting.
The device is designed
for one-phase
lation and must be in-
stalled in accordance
with standards valid in a
CAUTION
particular country. The
device should be connected according
to the details included in this operating
manual. Installation, connection and
control should be carried out by a qu-
alified electrician staff, who act in accor-
dance with the service manual and the
device functions. Casing disassembly
results in breaking the guarantee and
can cause danger of electrocution. Be-
fore installation make sure the con-
nection cables are not under voltage.
The cruciform head screwdriver 3,5 mm
should be used to instal the device. Im-
proper transport, storage, and use of the
device influence its wrong functioning.
It is not advisable to instal the device in
the following cases: if any device part is
missing or the device is damaged or de-
formed. In case of improper functioning
of the device contact the producer.
Zakład Mechaniki i Elektroniki
ZAMEL sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamelcet.com, e-mail: marketing@zamel.pl
TECHNICAL DATA
Number of separators in one casing: 4
APPEARANCE
Separator's terminal 1
instal-
Separator's terminal 2
Separator's terminal 3
Separator's terminal 4
SEM-01
Maximum voltage range: 300 V~
Admissible separator's voltage: 1 A
Maximum voltage drop: 1 V
Number of terminal clamps: 8
Section of connecting cables: 0,2 ÷ 2,50 mm
Ambient temperature range: -20 ÷ +45
Operating position: free
Casing mounting: rail TH 35 (PN-EN 60715)
Casing protection degree: IP20 (PN-EN 60529)
Protection level : II
Overvoltage category: II
Pollution degree: 2
Dimensions: monomodular (17,5 mm) 90x17,5x66 mm
Weight: 47 g
Reference standard: PN-EN 60669-1
INSTRUCTION MANUAL
2
C
o
VER. 001_12.11.2008